Diana 54 T01 owners...big favor?

[Flintlock28]

I'm going nuts trying to get quality Aperture sights for my Model 54 (T01 version)..

To anybody who has a 54 T01 VERSION ONLY!   Could you please pull off the stock FRONT sight, and let me know if the dovetail , is a standard 11mm European dovetail?

The T05 version is different from the T01, and I'm seeing what sights will work with the T01.

I may go with this one, but I have to know if the front sight will slide on the dovetail:

   https://www.pyramydair.com/product/airforce-adaptive-target-sight-set-fits-most-10-meter-3-position?a=2236

Thanks very much.

[Mark 611]

IIRC, it should be 11mm on the t01 guns but I'm not 100% on that.
if the scope rail is 11mm the front sight groove was smaller than that!

[Flintlock28]

IIRC, it should be 11mm on the t01 guns but I'm not 100% on that.
if the scope rail is 11mm the front sight groove was smaller than that!

Thanks Mark, from what I can tell, an 11mm European rail is 11mm across the top of the dovetail, and about 8 mm at the bottom of the dovetail.....

I didn't remove the front sight, but it looks like the front sight dovetail is 8mm (which would measure the same as the scope rail at it's skinny point), so long story short, I think that front sight I want , will slide right on.

[Mark 611]

Let us know how it works out!

[Flintlock28]

Let us know how it works out!

Will do.