On the hunt for new sub $ 700.00 PCP BSA Scorpion?

[rkr]

BSAs are well supported guns. Huub makes shrouds and regulators for them. Rancidtom has stainless steel pellet probes and XTX air loads of other things. Blast tamer is a very good add on and my favorite is a big ball cocking bolt handle:

rkr,

Do you know if Rancidtom makes pin style probes for the Scorpion rifles?  Or does he only make the original style flow through probes?

Thank you,

Taso

Only hollow nose probes work with multishot BSAs. A pin nose probe that will actually push a pellet with rear cavity past transfer port will not retract far enough to allow magazine insertion and removal. If you were to build a bullet shooting BSA a pin probe with shorter pin would work.

[RAJOD]

Options for your TKO that will all be happy to take your money (not that there is anything wrong with TKO, that is what my Scorpion has), in no particular order:
1. Neil Clague
2. David (Rocker1), and admin here on GTA
3. Baxter Walton (bwaltonpcp.net)
4. a Huub barrel shroud from XTX air
And probably other folks I'm not thinking of right away

Thanks for the list.   Not sure one which silencer to get,  Was going to get a TKO for the brocock but they only make them in 6.5", I want a shorter one like the one on my Daystate.   Those crazy long silencers might work well but also going to get knocked around more.   Just need one to cut the sound some does not have to be silent. 

[Tater]

Thanks for the list.   Not sure one which silencer to get,  Was going to get a TKO for the brocock but they only make them in 6.5", I want a shorter one like the one on my Daystate.   Those crazy long silencers might work well but also going to get knocked around more.   Just need one to cut the sound some does not have to be silent. 

You might want to call TKO. I have a 5" (for a Crosman), but I also think he makes custom sizes.

[RAJOD]

Thanks for the list.   Not sure one which silencer to get,  Was going to get a TKO for the brocock but they only make them in 6.5", I want a shorter one like the one on my Daystate.   Those crazy long silencers might work well but also going to get knocked around more.   Just need one to cut the sound some does not have to be silent. 

You might want to call TKO. I have a 5" (for a Crosman), but I also think he makes custom sizes.

I did call on the 5" said not for brocock.   I'll call again on the BSA.

[rkr]

Thanks for the list.   Not sure one which silencer to get,  Was going to get a TKO for the brocock but they only make them in 6.5", I want a shorter one like the one on my Daystate.   Those crazy long silencers might work well but also going to get knocked around more.   Just need one to cut the sound some does not have to be silent. 

You might want to call TKO. I have a 5" (for a Crosman), but I also think he makes custom sizes.

I did call on the 5" said not for brocock.   I'll call again on the BSA.

Huub shroud is as quiet as HW but 2" shorter.