Picture of Scope on Kral Puncher Breaker

[JimR]

As title say's..........anybody got a picture of their scope and mounts on a Kral PB ? I had to get a riser from a local shop to get the scope up. Not crazy about it. Scope is a Hawke 6-24x44 Varmint that I already had.

[PAcanis]

I had this pic in another scope thread.
I'm just using what I had on an AR. Perfect height.

[Rover]

Rail height is the only thing I don't like about the Kral. Seems like it needs to be 3/4"-1" higher. Not a big deal but it adds to the setup cost.

I went with Burris XTR extra-high rings at 1.5" and still needed 1/2" risers.

[Tweeter]

Hadn't noticed that before but that rail is very low.

[JimR]

Thanks all. I had to use a .7 inch riser and some high UTG rings. Don't know how to post pics but the riser sticks out over the front of the rail and I just don't like the way it looks. Guy at the outdoor shop said thats where he recommended it but WHEN I ever get to shooting the dang thing I'll probably try to reposition it. Is a 6-24x44 to much scope ? Guy said that kind didn't offer much eye relief..........

[PAcanis]

I'm just curious what the measurement is from centerline of bore to centerline of scope for you guys needing risers. Mine measures 3.125" and I thought that was high.

JimR, maybe try some of those quick-release picatinny rail sections. Amazon sells them in different lengths. Maybe they will conform to what you need better.

[addertooth]

There are 6-24X44 which do offer a lot of eye relief.  The little BSA I have on my Maximus has crazy eye relief.  Just read through the specifications of the scopes.

[kkarmical]

No risers here, just put the scope on works fine for me, 3-12 x 44.

[oldpro]

 Everyones face weld and eye relief is different but I needed extra high rings.