Installing regulator on at44

[Dave19113]

Just ordered a regulator for my AT44 through Air Superiority..... Was reading the directions it states online.... It naturally says to empty out the air reserve. Is there a release valve to train the reserve that I dont see? Or should I just shoot the gun out til its empty?


Thanks in advance

Dave

[blackdiesel]

You should have gotten a brass degassing part with the gun.  It scrall the air. wrench to release ews on the air tube valve, you just use the large 4mm allen

[Dave19113]

You should have gotten a brass degassing part with the gun.  It scrall the air. wrench to release ews on the air tube valve, you just use the large 4mm allen

I did receive a brass cap that screws on the end of the air reserve. Does anyone know of a video that describes it? I just dont want to do it in correctly...

[blackdiesel]

Sorry my typing got screwed up. Just screw it onto the valve in.  There should be a hole center.  Just use a 4mm allen into the hole and turn it.  Turn it slowly because there will be a loud hissing as the air is released.   

[Smoketown]

Does it look like this?



Cheers,
Smoketown

[Dave19113]

Sorry my typing got screwed up. Just screw it onto the valve in.  There should be a hole center.  Just use a 4mm allen into the hole and turn it.  Turn it slowly because there will be a loud hissing as the air is released.

Ok much thanks....