AA 200T

[mista meener]

I just got the air arms 200t and it is a lot smaller then I thought it would be. What really gets me is I have no way to fill it. I figured that when I saw the accessories that came with it. I looked on precision air guns and they seem to have the fittings but not sure what to get have to call them I want to be able to have a foster fitting on the air cylinder. has anyone that has the rifle got the fittings to do that?

[npunk42]

If you bought it retail, it should have come with a fill adapter at very least. Anyway its probably best to call Pyramyd Air and tell them the whole story so you are sure to get the right parts from the start.

[NorCal Matt]

If Pyramid Air carries it, go to their website and look up the gun. They should list what accessories you need with it when you choose your setup from the "PCP Hookup" tab below the picture of the rifle. If it's what they have listed as "T200", then you need this

https://www.pyramydair.com/product/air-venturi-ss-female-din-adapter-with-male-quick-disconnect?a=5358

Hope that helps,
Matt

[mista meener]

If Pyramid Air carries it, go to their website and look up the gun. They should list what accessories you need with it when you choose your setup from the "PCP Hookup" tab below the picture of the rifle. If it's what they have listed as "T200", then you need this

https://www.pyramydair.com/product/air-venturi-ss-female-din-adapter-with-male-quick-disconnect?a=5358

Hope that helps,
Matt

thanks a lot Matt it is out of stock for now and 40 bucks wow

[mista meener]

If you bought it retail, it should have come with a fill adapter at very least. Anyway its probably best to call Pyramyd Air and tell them the whole story so you are sure to get the right parts from the start.

bought it from airgun cheapo came with  a DIN adapter for a bottle so I have a pump with foster fitting the guy above showed me the right connecter

[Ribbonstone]

Haven’t used the adaptor that NorCal Matt listed, so I’ve no first hand knowledge.  Did look it up and it is listed as “out of stock” in the two places I checked.

Question:

Isn’t this part, that is currently out of stock:

https://www.pyramydair.com/product/air-venturi-ss-female-din-adapter-with-male-quick-disconnect?a=5358

The same as these two parts that are currently in stock?

https://www.pyramydair.com/product/air-venturi-female-din-adapter-1-8-male-bspp-threads-stainless-steel?a=5356

https://www.pyramydair.com/product/air-venturi-male-quick-disconnect-1-8-bspp-female-threads-steel-rated?a=3550

(BTW: I like that fill nipple. Uses a Delrin internal seal, which works without a dowdy seal. )

My AA 200T also came with a fill adaptor (bought from PA).  Called and they sent along the one below, which didn’t really help matters a. This adaptor would work for a direct connection between a fill tank and an AA 200T tube but it won’t work for connecting to a fill hose.

https://www.pyramydair.com/product/air-arms-fill-adapter-fits-air-arms-cz-rifles-w-detachable-tanks?a=3964


So even after they tried to correct the problem, still had the problem. 

I gave up and asked around for ideas. Came up with a hodge-podge collection of adaptors that connect to other adaptors.  Haven’t a clue where to get some of these parts now, so it’s not much use to you.



  The .22 is old enough to fill with that odd industrial sized fill nipple they used  for the first ones.




When I have both rifles out at the same time, will usually just bring the one adaptor and fill both tanks from the rear.  Didn't think I'd care much for remocing the tank to fill, but found that dealing with just the cylinder and NOT having to lay the rifle down makes it easier.

[mista meener]

Haven’t used the adaptor that NorCal Matt listed, so I’ve no first hand knowledge.  Did look it up and it is listed as “out of stock” in the two places I checked.

Question:

Isn’t this part, that is currently out of stock:

https://www.pyramydair.com/product/air-venturi-ss-female-din-adapter-with-male-quick-disconnect?a=5358

The same as these two parts that are currently in stock?

https://www.pyramydair.com/product/air-venturi-female-din-adapter-1-8-male-bspp-threads-stainless-steel?a=5356

https://www.pyramydair.com/product/air-venturi-male-quick-disconnect-1-8-bspp-female-threads-steel-rated?a=3550

(BTW: I like that fill nipple. Uses a Delrin internal seal, which works without a dowdy seal. )

My AA 200T also came with a fill adaptor (bought from PA).  Called and they sent along the one below, which didn’t really help matters a. This adaptor would work for a direct connection between a fill tank and an AA 200T tube but it won’t work for connecting to a fill hose.

https://www.pyramydair.com/product/air-arms-fill-adapter-fits-air-arms-cz-rifles-w-detachable-tanks?a=3964


So even after they tried to correct the problem, still had the problem. 

I gave up and asked around for ideas. Came up with a hodge-podge collection of adaptors that connect to other adaptors.  Haven’t a clue where to get some of these parts now, so it’s not much use to you.



  The .22 is old enough to fill with that odd industrial sized fill nipple they used  for the first ones.




When I have both rifles out at the same time, will usually just bring the one adaptor and fill both tanks from the rear.  Didn't think I'd care much for remocing the tank to fill, but found that dealing with just the cylinder and NOT having to lay the rifle down makes it easier.

Many thanks ribbonstone. my rifle came with the same connector yours did and of no use for me have no bottle. but your links to the separate fitting are the right ones. you guys are great here