hatsan 125 trigger assembly old type

[mad187]

hi i have the old type 125 and was going to take out the spring and piston to moly tune it.but got into a little bit of a problem disassemble (ore take out the trigger modul) do not think this one have QUATTRO as in most of the info videos on youtube it says not written quattro on the blued steel .i have that old type of 125 whit 4 screws two on each long side on the airgun and it has a thumb hole stock  .so i need to know how to take the trigger modul of ore if i need to take it of.i hope that  someone here can help

[BobbyHumphrey]

  I have a WFH that has an older type of trigger than the quatro. Might be the same but from what I understand there are 2 older types of triggers before the quatro. They are like the triggers found on the daisy 1000.  So maybe you can google that and get a diagram. If yours is like mine I can sure help with something I found out. When you take out the pins to remove the trigger there is one that has to be pulled out because it holds the trigger housing onto the gun but if you pull it out and remove it entirely the trigger parts will fall out and if you dont have the diagram or the ability to solve a rubix cube your in trouble. However if you push in a shorter replacement temporary type while pushing out the longer one that alsoholds the trigger group to the gun you can  hold the trigger group together but still remove it.
   Also I got the bright idea to make the trigger pull much lighter and shorter since it was all apart and I hated the way it was. Warning... be carefull. I could not find anything to tell me what to do, and although it is very much to my liking now I had a few miss fires till I got it right. I ended up disassembling the gun AT LEAST 30 times. I found it kind of difficult at first because of the trigger but I can take it apart and put it together so fast and easy now. And  I understand the way the springs and leverage points effect the trigger pull.
   In summation , it is a crappy trigger with a really long stiff pull. But it can be made pretty much however you want. Just dont give up. PM me if I can help.

[mad187]

thanks but i got good help Nathan here on gta so got the trigger modul assembled.he sent me a user manaual for the exact trigger module on email