Shoe Box directly to gun?

[YoteMaster]

If you have a Shoe Box can you just fill your gun directly (I have an MRod) to, say, between 2000-3000 (without using an intermediate tank)?

[Rescue35]

Yes you can.

[Bullit]

You need a shop compressor (at 85psi), to feed source air the shoebox. It further compresses it and then You can then directly connect the shoebox to fill your Mrod.

[Ol'DeadEye]

How long to fill an Mrod from total empty, directly from shoebox ??

[Rocko]

Don't know about the M-rod, but my AT44 takes about 10 min  from 100 bar to 200 bar.

[mtsheron70]

Yes but you need a minimum 85 psi oiless compressor to be the activating source of the SB.  Believe I read somewhere about 7-10 minutes depending to charge a M-Rod.

[Dixiedog]

You'd have to watch your pressure so you'd be ready to shut the shoebox off when you hit the desired pressure.

[bnowlin]

If ti is the new Freedom 8 shoebox you will need 125  psi steady feed and it will fill twice as fast.  Dont depend wholly on the MRod gauge some timeds they are wrong.   If you have a guage that came with your hose IMO I would use it.  Watch very closley either way.
Bob