Airforce Talon help

[FeelsGoodMan]

So I recently purchased the V2 regulator from Pcp tunes. I finally was able to get the valve off of my air tank in order to install the reg. Got everything screwed together and in place. When I put the original guage back into the airforce valve I have air leaking from it. Can you guys offer any helpful solution? I'm new here so sorry if this isn't in the right place.

[starlingassassin]

So I recently purchased the V2 regulator from Pcp tunes. I finally was able to get the valve off of my air tank in order to install the reg. Got everything screwed together and in place. When I put the original guage back into the airforce valve I have air leaking from it. Can you guys offer any helpful solution? I'm new here so sorry if this isn't in the right place.

a few wraps of teflon tape can help.  and make sure its tight.

[FeelsGoodMan]

What do you suggest if that doesn't work

[Back_Roads]

 Possibly the gauge is leaking, replace the gauge. I had a gauge blow on me while filling. Called Airforce and they sent me a free one on warranty.

[starlingassassin]

What do you suggest if that doesn't work

if it was holding air before you took it apart it probably just needs a little teflon tape,or tightened more.


id make sure the gauge is tight first though.

if you cant get it to seal with teflon tape or just by tightening it more,
i have an old working airforce gauge i could send you.

but in reality i think tightening or teflon tape should fix you right up.