What do I have ?

[yote300wsm]

 15-20 yrs. ago the Chinese sent boatloads of under-lever .177 AG's to the USA at 30-40 $ a pop. Every gun shop around had piles of them. I bought 4 of them and gave them to nieces/nephews. Well, someone could not stay out of trouble with it so I got it back after 10 or 12 yrs.

My ? is; What is it ? .177 cal, underlever, Says "Made in Shanghai China" on the receiver near the breech. Above that it has a symbol that looks like a ball-diamond with a capitol "I" in the middle. It also has a serial #. My camera is on the fritz. Otherwise I would post pics.

[mikeiniowa]

most likely a B-3-1 under lever, Cummins tool sale type rifle. They have been made by many different companies over the years, some much better than others.

[RedFeather]

I think that's an Industries brand B3, as Mike said.  Cheap but effective.  Do some searches on it and you will see beau coups variations.  I believe the older ones have the rear sight on the back of the receiver.  Mine in ahead of the breech.  Lots of tunes, etc, for these.  And, believe it or not, since they are no longer being imported, these are actually appreciating in value, if the classifieds are any indication.

[Jonesin]

Does it look like this? Mine has had the truck bed paint "mod" and the sight is behind the breach. It's a good shooter and has taken game squirrel sized and smaller but needs to be tuned and trigger work done as the trigger is very heavy. I might cut my home tuner teeth on this one. My Dad gave me this several years ago and the next year he gave me my "bullpup" b57 in the hard plastic case. Also, there is a scope stop screw hole...note the screw at the fron of the rear sight. That actually screws into the AG to help hold it on.

[yote300wsm]

Yup. Are there any seal kits? I noticed that the front breach seal is worn.

[joek]

the trade mark is for Shanghai/Industry Brand

[MichaelM]

get you some 3/8 fuel line or other aprox sized hose and cut it to length.... makes for a much better breach seal then the &^^& stock seals and at about a buck a foot well... you can make tons of them

[LADave]

There is a kit for the B3 at South Summit. It comes with a spring,breech seals, trigger spring, sear, cleaning rod and air gun oil. There is a piston seal too, but it is synthetic.
My seal is leather. Man I love that gun. Be happy that your gun found it's way back home.
LADave

[Onebaddj]

Ive got 2 of those. Each has different sights. I used one as a test bed to learn how to take spring guns apart. I tried to use the stock spring from my big cat in it but not much good came from that. The one I took apart has a synthetic seal in it. Super simple and effective but rough compared to my tuned guns. But hey for about 500 cheaper than what I have wrapped up in my 350 its a great gun for the value. Glad I found this thread will have to check out the tuning stuff at the sight mentioned above. Thanks for the info all!