TRAIL SHROUD

[SMOKEY]

Anyone know if a trail shroud and corresponding pieces will bolt on the titan with no mods?

[uncle paulie]

IDK for sure, never tried it, but can't see why they would use different barrels from a manufacturing standpoint. Worse case scenario...you would have to shorten the tube a bit or perhaps get a barrel to go with it, less than $30.

pv

[RCTrax05]

The Titan shroud simply slides onto the barrel, and is held in place by two setscrews which simply lock onto the sides of the barrel...

The Trail shroud actually screws onto threads on the end of the barrel...

Given the differences, unless you have some machining skills, I would say the answer is NO -- you cannot swap the shrouds...

[fgwhite]

i was woundering the same thing i wounder what a titan barrel diamiter is and i wounder what a trail barrel diamiter is if there the same then person can order trail barrel asembley the tube both end caps and the 2 o rings then cut and recrown the titan barrel and cut threads with a shoulder stop and it sould work 

[john]

Welcome guys to GTA.

Trail NP barrel diam 13mm. If Titan muzzle is not male-threaded to match Trail NP, you'll have to... i don't have thread gauge so don't know thread size.

Do search on "Trail NP shroud" or variations...should get lots of hits...related subjects have been widely discussed.

[uncle paulie]

Someone should have know the proper thread size and pitch for the muzzle on the trail. You should be able to get it cut at any machine shop or gun shop for a minimal cost.

pv

[Muppit]

ust get the trail barrel to ,its like 20 dollers and save yourself the trouble