Poly Tube for transfer port

[Zippy]

If any one needs the drill and poly tube for the transfer port seal upgrade just PM me and I can send it out. I work in Automation and I can get it all for FREE. 90 durometer SMC 1/4" airline tubing and what ever drill bit you need. It's ok the Boss loves me..Ha.

[bluesdaddy]

Zippy, if the offer still holds I could use a replacement for my M-Rod I tore the seal on the transfer tube. Thanks

[rsterne]

What is the inside diameter of the 1/4" OD Poly tubing you have?....

Bob

[Paul in MD.]

Thats real nice of you,Zippy.

[MustangMike]

can some one post a picture of those poly tube transfer port, and a review of how well it works

[john]

can some one post a picture of those poly tube transfer port, and a review of how well it works

^+1 For the education of us noobees, it would also be nice to know what gun(s) this applies to, what it is, why it is cool, etc. I assume it is just a means of changing the port diameter...?...anyone?

[MustangMike]

It allows people to yes change port sizes but also in my case I want to get a riser block and full shroud for my disco..

With sergio his riser block kit is 70 bucks with the riser block, extend cocking pins and transfer port.. if I can make my own transfer port then a riser block is fairly easy to make with pvc and boiling water.. thus saving me 70 bucks since I could make my own rsier block kit and only have to shell out dough on a full shroud w/internals and a end cap

[Motorhead]

Use it in my Modified M-rod .... inside diameter of the red colored air brake line is .165"

[MustangMike]

picture didnt show

[Zippy]

Sorry guys been out of town for work PM me if you need some to play with