TX200 MK III trigger lube?

[ivanpros]

I replaced the spring and piston with the Vortek kit, couldn't help myself and tore apart the trigger assembly. Does anyone recommend a replacement lube, the OEM was really sticky inside the entire trigger block assembly. I cannot find anything on the internet that resembles this. I noticed the Rekord trigger is very similar; maybe someone know what is used on these?


Edited:
Actually made in England but we do not have a England gate. Thought it best fit here.

CDT

[Mark 611]

I'd use a 50/50 mix of super lube and moly, but thats just me!

[s10gto]

Marks suggestion will work great and this is the lube you removed.

http://www.google.com/url?url=http://www.airgunsofarizona.com/Napier.html%23NapierVP90GunGrease&rct=j&q=NAPIER+VP90+Gun+Grease&usg=AFQjCNFDB2DG8eEx3avIeiHYInh4qkIkyw&sa=X&ei=4sAlT-H5MIPW0QHh75m7Cg&ved=0CC8QygQwAA

[ivanpros]

Thanks, I am presuming the VP90 would help with reducing vibration, minimize rust and water resistant? Moly could to the same I suppose, but what does the superlube add?
 
Thanks for moving this thread to German Gate, makes sense from looking at some of the Euro AR's

[Mark 611]

it makes thing really slick it's {PTFE} Teflon

[ivanpros]

ahh got it! I will try it. Thanks a bunch.

[tjk]

Marks' advice is great advice. My only offering would be to go easy with grease textured lubes as they will over time catch and hold small particles of dirt/grit etc and cause inaccurate or 'false feel' of the trigger stages  and stop/release points.