What about the Diana 460 Magnum

[JayDee24ca]

Good Job!

Congrats!

Keep well and shoot straight!


Yeah, it worked out well on the 460, but I have no idea of how I am going to be able to mount a globe front sight on my Diana P1000. There is nothing to work with except a threaded cap.


HM
[/quote]

[HectorMedina]

Yeah, it worked out well on the 460, but I have no idea of how I am going to be able to mount a globe front sight on my Diana P1000. There is nothing to work with except a threaded cap.

Don't know which P-1000 you have. Mine comes with the "integral" moderator mounted on a 15 mm's OD barrel.

If this is your case, it should be possible to make an adapter to install the EMS "Premium Korn" onto it, because it is made for a 16 mm's OD barrel.

https://www.german-sport-guns.com/Premium-Korn-Tunnel-Set-DIANA-34-EMS/540.90.0006

HTH, keep well and shoot straight!






HM

[Toxylon]

9.  I found that a Titan #8 fit the stock (and spring guide) nicely and gives factory power or maybe more. 

Brian, that's a tremendous piece of useful info. The Titan #8 (made for HW95) is not a powerhouse spring by wire size, dimensions, or nominal destination, but so, in the highly-effective 460 Mag powerplant it produces 30 J of muzzle energy!?!

The Titan #8 is way more widely available and even a little cheaper than the Titan #14 (made for the 350 Mag), whose powerplant is the basis for the 460 Mag. Of course, the 350 Mag has as long a TP as the 460 Mag has a short one, which means the #8 would not probably make a splash in the former gun.

[Sfttailrdr46]

My D460 .177 after a complete home tune and serious TLC is very accurate out to 60+ yards the only caviot  is it does require heavy pellets (14gr}

[Kragman1]

Duke, my T06 .22 D460 is now making around 22fpe with an ARH piston seal, fresh breech seal and a Titan #8.  The Titan did need to have the ends squared but I did not remove any coils.

It's stiff to cock but not a nightmare.  It may get easier as the spring breaks in. 
I don't know how accurate it may turn out to be but it was very effictive while we were goofing around at 60 yards after the spring swap.  Not really sighted in yet either.  I have high hopes.

[Denby95]

Duke, my T06 .22 D460 is now making around 22fpe with an ARH piston seal, fresh breech seal and a Titan #8.  The Titan did need to have the ends squared but I did not remove any coils.

It's stiff to cock but not a nightmare.  It may get easier as the spring breaks in. 
I don't know how accurate it may turn out to be but it was very effictive while we were goofing around at 60 yards after the spring swap.  Not really sighted in yet either.  I have high hopes.

May I ask where you got the titan 8 from? Did you use the OEM guide with that or make one? I bought the ARH full power D460 spring and have been disappointed that the output is about 17 FPE, and Jim told me that was fine.

[Toxylon]

I have a bunch of Maccari mainsprings and I will continue to test them until I have none, but truth be told, I'm becoming a little disillusioned with them. They never fit the OEM guides, and they are quite reedy, underpowered, and unstable, changing length and shape like a magician's prop.

I can't really take at face value anymore his claim that mainsprings taken to within a hair of coilbound every shot is no problem, and actually something that you HAVE to do with his springs. Also, saying that 17 fpe with a full power spring in a 460 Mag is as it should be is a bad joke at the customer's expense.

It's Titan all the way for me, as far as new spring purchases are concerned.

[Ike the GSD]

I have a bunch of Maccari mainsprings and I will continue to test them until I have none, but truth be told, I'm becoming a little disillusioned with them. They never fit the OEM guides, and they are quite reedy, underpowered, and unstable, changing length and shape like a magician's prop.

I can't really take at face value anymore his claim that mainsprings taken to within a hair of coilbound every shot is no problem, and actually something that you HAVE to do with his springs. Also, saying that 17 fpe with a full power spring in a 460 Mag is as it should be is a bad joke at the customer's expense.

It's Titan all the way for me, as faNEW-GRT  RWS 31,34,36,38,40,45,46, 48,54,300 Springr as new spring purchases are concerned.

I just ordered a NEW-GRT  RWS 31,34,36,38,40,45,46, 48,54,300 Spring for my model 34, I hope I have better luck than you have had with this company, I've tried two different Vortek springs, the last one has 33 coils and .125" wire dia. it will only push the Crosman 7.9 CHP's @ 835-840 fps. Just for giggles I put the new Weihrauch spring that I ordered from AoA for my R9 in the 34 and I gained 30 fps with the Crosman Ultra Magnum 10.5 gr from 700-707 to 730-738, the 7.9 Crosman's went from 840 to 856-860 fps. I'm hoping the ARH spring will give me the 14 ft lbs I'm looking for👍

[Mark 611]

Well, couldn't stand it, all this talk about the 460mag, I got mine out of the mummy dust and mounted a new scope! I also just ordered 3 Titan #4 springs, seeing's how ARH is not offering any springs at this time or kits, I have extra piston seals, so I need a few breach seals, I planning to keep this rifle running along time, I have not really shot this rifle since 2018, other than a shot here and there, it's a killer for sure!

[Sfttailrdr46]

Well, couldn't stand it, all this talk about the 460mag, I got mine out of the mummy dust and mounted a new scope! I also just ordered 3 Titan #4 springs, seeing's how ARH is not offering any springs at this time or kits, I have extra piston seals, so I need a few breach seals, I planning to keep this rifle running along time, I have not really shot this rifle since 2018, other than a shot here and there, it's a killer for sure!

Put a few down the spout of my D460 I forgot how heavy the cocking effort is. I'm sure my left arm will be reminding me I'm not a kid anymore.

[Mark 611]

Ya, if I wasn't still having to handle heavy steel parts all day long, I might feel the same way