1399 stock causes 1322 unablw to cock

[Ramrod1948]

Bought a used 1322 that works well.  I compressed main spring to decrease the trigger pull.  When i added the 1399 stock it would not cock.  Tried loosening screws on 1399 stock and even taking them out and as long as the stock is in place the gun won't cock.  The trigger spring is not bent. With the pistol grips installed the gun works fine. Very puzzling.

Anyone experience this?

[Robert 5mm]

The spring must be restricted some how when you put the 1399 grip on.
The sear ( part #22) must be not moving up to cock the hammer.

Attached is EVP in PDf file format

[Ramrod1948]

Upon further investigation, the problem is the stock.  Tried to test on a newer 1377C and could not get the stock on.  Took out the 1st 1322 i bought back in 1978 and it worked fine.  Must be a different 1399 stock for older and newer type 13** series.

Learn something new every day.

[Rick67]

Bought a used 1322 that works well.  I compressed main spring to decrease the trigger pull.  When i added the 1399 stock it would not cock.  Tried loosening screws on 1399 stock and even taking them out and as long as the stock is in place the gun won't cock.  The trigger spring is not bent. With the pistol grips installed the gun works fine. Very puzzling.

Anyone experience this?

The trigger assembly plastic plate is somehow pressed.

Try overly tightening the 3 screws and it will behave the same way even without the problematic stock.