Length of Pull of D460?

[Toxylon]

Recently, I learned the K98 Mauser springer has a length of pull of just 33 cm, in keeping with the powder-burning original. That's way short to me.

I wonder what's the length of pull of the D460, or the gun the Mauser springer was built on. Can anyone with a 460 tell?

[Back_Roads]

Recently, I learned the K98 Mauser springer has a length of pull of just 33 cm, in keeping with the powder-burning original. That's way short to me.

I wonder what's the length of pull of the D460, or the gun the Mauser springer was built on. Can anyone with a 460 tell?

Not sure on the 460, but the K98 actually feels right with its long length it shoulders free hand perfectly, I Shot a
FT match with mine once, and did great in the forced positions, and did well with the rest also. Really not the gun for FT, but we had a newb with a Diana 34, so I took the springer option to keep them in good company.

[Robert 5mm]

460 = 13-7/8" or 35.25 cm
K98 = 13" or 33 cm ( I have a slip on Pachmayr pad - takes mine to 13.75" )

[Deerstalker]

FYI, HW95L LOP = 14.25”, 362 mm, trigger to center butt.  WIN M70 30-06 = 13.875", 349.25 mm, CVA Accura V2 50 BP = 14.5", 368.3 mm.  Note - LOP = length of pull measured from trigger to center butt.

[Lt. Dan]

Courtesy of Cslinger. Look at reply # 6 here

https://www.gatewaytoairguns.org/GTA/index.php?topic=91224.0

Diana 460 Stutzen - 13 3/4 in
HW98/Beeman R11 - 13 1/2 in
HW77 14 in
HW30s/Beeman R7 - 13 3/4 in
CZ631 - 13 3/4 in
CZ634 - 14 1/4 in
HW35e - 14 3/8 in
HW95/Beeman R9 - 14 1/8 in
HW97K - 14 1/4 in
HW97K Thumbhole - 13 7/8 in

[Toxylon]

Thanks guys, especially Robert

Just what I assumed - the 460 would fit me well.