Notos upgrade???

[shaky2]

I installed the Airgunarcheryfun gauge block and if weather permits today I'll see if accuracy is still as good as it was. The reg gauge is showing 2100psi which is what others have said theirs is set at. I think there should be a power boost from doing this but really the only difference I could see inside is the hole is bigger than stock.

[shaky2]

I installed the Airgunarcheryfun gauge block and if weather permits today I'll see if accuracy is still as good as it was. The reg gauge is showing 2100psi which is what others have said theirs is set at. I think there should be a power boost from doing this but really the only difference I could see inside is the hole is bigger than stock.


UPDATE.....I already put the Notos back to stock setup. That gauge block caused me to lose 3 shots but gained 52fps. The main reason I put it back stock is the gauge block wasn't made true and square and it made the air tube to have a substantial gap between the tube and barrel on the end by the suppressor which I did it like. I think if you zoom in on the pic you can see it.

[ranchibi]

Oh man...sorry to hear about the misalignment....😢....52fps is big gains considering it's size. Did you contact them and let them know about this?

[kbstingwing]

you ought to just do the Bottle conversion instead, you gain a gauge block plus more shots per fill, I have the 500cc bottle on mine, I get over 300 shots per fill, you can put a smaller bottle on and still get very high shot count and not increase the gun weight, carbon fiber bottles are very light and use a 2200 psi regulator and you will get the about same fps as stock, mine gets 780 fps with CPHP's. still a laser, been picking off squirrels out to 50 yards +, it's my Favorite go to gun now....

You can PM Firewalker for info on the conversion.

[shaky2]

Oh man...sorry to hear about the misalignment....😢....52fps is big gains considering it's size. Did you contact them and let them know about this?

No I didn't contact them. Probably the only thing they might do is send me another and I don't want another. The only thing I really liked was knowing what the reg pressure is and I don't really need that. I drilled out the stock block just a tiny bit and got 20fps and I'm happy with it.

[shaky2]

you ought to just do the Bottle conversion instead, you gain a gauge block plus more shots per fill, I have the 500cc bottle on mine, I get over 300 shots per fill, you can put a smaller bottle on and still get very high shot count and not increase the gun weight, carbon fiber bottles are very light and use a 2200 psi regulator and you will get the about same fps as stock, mine gets 780 fps with CPHP's. still a laser, been picking off squirrels out to 50 yards +, it's my Favorite go to gun now....

You can PM Firewalker for info on the conversion.

 I considered doing that but then I would have another 150 or more in it.  I would do the conversion myself. Mine is shooting the CPHP's at 760 now but they aren't all that accurate.