Where to get .177 nova liberty shroud end cap ?

[cosmic]

Well the first time shooting this year and the #% tiny screw that holds the shroud on fell out somewhere !! I took a shot and the shroud slid up the barrel several inches..  The end cap got hit bad.. If anyone knows where I can get one let me know.. PM me..
                                       Thanks,
I will be selling the rifles I have for a larger caliber since I shake badly from essential tremors, and can not seem to grab and hold on to the .177 and .22 slugs..

[Antwuan Maxx]

Maybe you can contact Air Venturi/Pyramyd Air and see if they have them in stock for the Seneca Aspen.  Pretty sure they are the same  as the Liberty. 

[Madd Hatter]

They are.

[SILENT SQUIRREL]

cosmic
IMO someone on the forum will respond to this thread and have one for you
If  that optimism proves to be misplaced, then you might find one by posting a "Want to Buy" ad in the classifieds.
BTW
The end cap for the Nova Liberty is also the same as the Freedom/Aspen; and I believe they are not caliber specific.

Worst case  (most expensive) scenario would be buying a moderator adapter from DonnyFl.
It would screw into your shroud, and comes with an end cap
https://donnyfl.com/products/nova-vista-liberty-1-2-x-20-a50
$40 + shipping

Hope this helps
Ed

[cosmic]

 NSA slug did a number on it

[oldpro]

NSA slug did a number on it

The slug isnt the issue the floating air stripper is. Get a Hajimoto set up

[cosmic]

   No the slug wasn't the issue it was the tiny screw that fell out of the plastic rear shroud spacer to barrel piece ... The shroud slid up during the shot which caused the misalignment problem ..

[oldpro]

   No the slug wasn't the issue it was the tiny screw that fell out of the plastic rear shroud spacer to barrel piece ... The shroud slid up during the shot which caused the misalignment problem ..

Ouch!!! Still get the Haj kit it centers the barrel much better.