RTI Priest/Prophet Owners!

[YEMX]

I'm not even sure if the Prophet is out yet...  So if not, Priest and Priest 2 owners please chime in!! 

I've been looking at the Priest/Prophet, as I like the overall configuration, and ease of caliber changes.  However, I do have some questions, for those that have a Priest/Priest 2.  Do y'all think the Priest/Prophet is/would be a viable platform for .357?  I notice that on the RTI website, the available calibers only go up to .30...  Not sure if that's because EU doesn't have a good supply of .357 barrels, .357 just hasn't taken off there or what...  Or possibly, .357 is just too much for the platform?  That's my worry.  I know the loading port is big enough for both .357 pellets and the .357 slug I have a mold for (length-wise)...  Just not sure if the platform is up to it.  But I know nothing of the platform, hence the post.   

So if you're a Priest/Priest 2 or a Prophet owner, please chime in!! 

I know there's the Impact, but I actually like the Priest/Prophet better.  I like that the loading port is on top, it's longer (advertised as 16mm long), and of course, the fact that it's cheaper than an Impact.  For this post, I'd like to stick to the Priest/Priest 2 and the Prophet (if it's even out).  I would prefer those that have experience with these airguns to respond.  TIA!

[Calt]

I have posted this before and am currently in talks with Mr Rob from RTI about the many problems I have with my Priest 2 that I have shot for over 16 months now.
The platform is amazing and the balance is great. the rifle is short and compact and shoots well.

Now for the bad news and the reason I am getting emails from the owner of AoA and RTI.  I have upgraded only with RTI parts and have not added anything other than an adapter and 0dB moderator. the moderator is now damaged due to use of the items sent with new 5.5LR barrel not being correct for the Priest 2. All items they are selling as upgrades for the Priest 2 dont really fit the Priest 2 and will give you lots of issues. Also good luck trying to get a response on how to install or tune the rifle.

Priest is difficult to cock compared to even my Hatsan's. I would recommend taking another look at FX because i am now well into the price for one with this Priest.

1)   Priest 2 Picatinny rail out of spec ( no repair or replacement sent)

2)   22LR barrel, end of barrel baffle too small to use in Priest 2 will cause clipping and inaccuracy. (once baffle is replaced with proper fitting size barrel performs very well) AoA did not send barrel tool with Barrel had to call to get the item.

3)   Power plenum , works well and seals great

4)   Spare magazine purchased for $63 from AoA , Old style was sent. It’s a gamble if you will get old or new items.

5)   Original adjustable regulator constant pressure climb inconsistent.

6)   New 2020 adjustable regulator, leaking from every location but the G ½-14 thread that’s 4 out of 5 location are leaking. I can provide a video to show this in a tub.
 
7)   Preordered Cocking lever conversion kit. Delivery is later than stated along with no information. Two plus months with no reply or information on the $180 item.

[YEMX]

While that certainly is disturbing info, the Priest 2 or Prophet would only be a "base".  As I plan on making my own barrels.  Likewise, the reg is another non-issue, as I would be using a Ninja Flex reg.  I'm more curious as to whether or not the platform can handle up to .357...  But I appreciate the input.  At least I know to perhaps not buy one from AoA. 

Now that side lever conversion is disturbing because RTI said AoA should have had their supply earlier this month to sell.  But not only do they not have their supply, but they're not updating their customers who have pre-ordered?  That's not good business...