Trigger too light TX200

[niclaw]

I sometimes come up against the second stage in the trigger and accidentally fire.  What adjustment will make the second stage a little stiffer.  Thanks

[Roadworthy]

The two screws in the trigger blade adjust the first and second stages.  The difficulty of pull is controlled by the screw behind the trigger blade.  Specifically look in the Trigger Adjustment section of the manual:
https://www.air-arms.co.uk/user/downloads/TX-ISS6.pdf

[Nitrocrushr]

I sometimes come up against the second stage in the trigger and accidentally fire.  What adjustment will make the second stage a little stiffer.  Thanks

As Thomas mentioned, you could try adding trigger tension by turning the spring tension up a tiny bit (screw behind trigger).  Clockwise just a tiny bit.

However, you may just have a 2nd stage that is too light.  Looking at the 2 screws in the trigger, turn the back one clockwise just a tiny bit and test.  You don’t have to move it much, just enough that you see it move. 

Steve

[Frank in Fairfield]

Here you go..
If your rifle has been removed from the stock, you may have tightened the front screw TOO much when replacing it...Don’t..

[niclaw]

Thanks for all the replies.. I adjusted my trigger and it must have helped.  No unexpected fires and my highest score yet in Field Target.

[LSK]

Great!!
Thanks all the info helped me also