Help on barrel bending?

[prosportfan]

dude, my 1st time bending barrels i was a mess and with the help of Ed and others, I became a little more comfortable.  Comfortable enough to go to my 4runners bumper where you slide the trailer ball into, that square thing and or where you hook the chains to, put the barrel through and BEND. 

[Nvreloader]

Guys

Another thing the wood splitter is good for is,
reducing/cutting off small enough chunks from a lead pig,
a lot better than sawing or hammering off pieces with an ax blade etc,
cut into 2" thick sections, then split in half etc.........

Had to put a 2" thick hunk of wood in front of the anvil and then the sharp wedge part worked perfectly,
with NO loss of lead. 

Tia,
Don