Just cleaned my new mold

[Wayne52]

Wayne do you find that the hollow points are more accurate than the flat nose ones?

Right now I think the biggest advantage with them is I can shooting the best of two, the 23 grain pellet and 28.2 grain slug with the tune that I have on my Dominator right now.  When I had the gun tuned for the flat nose it did exceptionally well at distance especially.  I remember quite some time back how Bob prefered the hollow point for hunting and I've always wanted the HP since.  I think they'll be a perfect slug for the bigger small game, if these will chamber in something like the Seneca Carbine I'll bet they'd really be devastating at long distances with some higher velocities.

[Hobbyman2007]

I’ve shot the solids in everything from a PP700SA at 450 FPS to an Evanix K550 at 975fps including a Benji 392 at 650 FPS . When sized right they are awesome . I really need an HP version . It’s my favorite bullet in .22 cal , low enough weight and short enough to fit every magazine I have .

[K.O.]

Just some FYI for those following, I have been shooting these  unsized out of an AT 44 .22 @ 40 FPE stock settings with 25 usable hunting shots, and the same approx with my modified Sentry .22
 BTW nice videos as always Wayne

James is your AT 44 the shorter barrel... is it QE or pre QE...I have the AT 44 Long and can only get them to work if I size to .216 and then knurl them...

I am at about 42 fpe...untouched out of the box... am thinking it is harmonics... it is a 23" barrel and only  the one barrel band... about .75" at 35-40 yards... 1.5 % tin... need to order some 99.9% lead and try pure lead...

[K.O.]

Just some FYI for those following, I have been shooting these  unsized out of an AT 44 .22 @ 40 FPE stock settings with 25 usable hunting shots, and the same approx with my modified Sentry .22
 BTW nice videos as always Wayne

James is your AT 44 the shorter barrel... is it QE or pre QE...I have the AT 44 Long and can only get them to work if I size to .216 and then knurl them...

I am at about 42 fpe...untouched out of the box... am thinking it is harmonics... it is a 23" barrel and only  the one barrel band... about .75" at 35-40 yards... 1.5 % tin... need to order some 99.9% lead and try pure lead... this is with the .217/.219 mold...I also have the .220/.222 mold... which is yours..?

[Wayne52]

The last ones that I used I upped the tin a little and I did notice a little difference when chambering them in my Airmax Dominator but nothing drastic and they shot really good but I'm going to use the rest of the lead I have in the pot for pellets and go back to pure lead.

[Back_Roads]

Just some FYI for those following, I have been shooting these  unsized out of an AT 44 .22 @ 40 FPE stock settings with 25 usable hunting shots, and the same approx with my modified Sentry .22
 BTW nice videos as always Wayne

James is your AT 44 the shorter barrel... is it QE or pre QE...I have the AT 44 Long and can only get them to work if I size to .216 and then knurl them...

I am at about 42 fpe...untouched out of the box... am thinking it is harmonics... it is a 23" barrel and only  the one barrel band... about .75" at 35-40 yards... 1.5 % tin... need to order some 99.9% lead and try pure lead...

 Mine is a short, the Sentry is kinda short too. I do cast in almost pure lead, 1% tin .some % other alloys from reclaimed lead from my traps, lightly blended in with the pure.
 On the other hand my .25 Bull Boss is on the long side of things and does awesome with the 40 gr. . 25 BBT @ 900 + FPS for 9 shots.
 

[K.O.]

Guess I need to get another barrel band... and some pure lead... ed just showed a really nice 60 yard Urban group with pure lead...Have a feeling it might help the drastic choke on my AT .22...

Which size are you running in the AT... the 217/219 or the 220/222..?

[Back_Roads]

.217 is cast size, my swage is down to .216. both shoot equally well.