A 2260 can exceed 500 fps on CO2, so that could be a good reason to use an unmarked tube, IDK, otherwise if the 2260 is a PAL gun you could have to prove yours was under 500....Bob
Quote from: rsterne on July 13, 2019, 04:02:23 PMA 2260 can exceed 500 fps on CO2, so that could be a good reason to use an unmarked tube, IDK, otherwise if the 2260 is a PAL gun you could have to prove yours was under 500....BobThat was my thinking , that by using a smooth tube would make me the manufacturer and up to me to decide its fps intended(non pal) . I plan on a fps around 460 , just a low range plinker.Thank you for your Help
Quote from: Walther on July 13, 2019, 08:31:40 PMQuote from: rsterne on July 13, 2019, 04:02:23 PMA 2260 can exceed 500 fps on CO2, so that could be a good reason to use an unmarked tube, IDK, otherwise if the 2260 is a PAL gun you could have to prove yours was under 500....BobThat was my thinking , that by using a smooth tube would make me the manufacturer and up to me to decide its fps intended(non pal) . I plan on a fps around 460 , just a low range plinker.Thank you for your Help You could order a stainless one from Don Cothran.
Alain, that is just a 1/8" NPT Hex Pipe Nipple.... I drilled and tapped the front of the valve and then added a drilled spacer for the spring....Bob