6000 PSI SCBA PCP fill station, cheap price, works great.

[kbstingwing]

I found this on Wally World (walmart) website and bought one for $40.50, it has a 24" micro bore hose with foster quick connect (Female) and a 6000 psi gauge, the manifold seems to be quality and the relief valve works fine, it is a hand tight type bottle connector, all works excellent, I like it, and for the price it's a bargain

[USAFANG6799]

Excellent find!
I'll take note of it if mine ever needs replacing.

[Nvreloader]

Kevin
Be sure to get some extra "O" rings for the tip, as you need them factory is junk,
I have 3 of them one on each SCBA Tank..................

Tia,
Don

[Back_Roads]

@$40 almost worth having handy as a spare, even though my trucks do not carry one 

[KnifeMaker]

Good price for a backup. 

[Airgunhunter73]

I have one just like it I bought on eBay works great now I can fill one bottle with the YH and one with the omega air charger when I get home from the shooting range.

[gendoc]

i also have 2 of these, one on my 88cf and the other on a 44cf scba tanks.
the 44 has a gritty bleed valve while the other is smooth, both work
very well.

[rdwilson]

I found this on Wally World (walmart) website and bought one for $40.50, it has a 24" micro bore hose with foster quick connect (Female) and a 6000 psi gauge, the manifold seems to be quality and the relief valve works fine, it is a hand tight type bottle connector, all works excellent, I like it, and for the price it's a bargain

             …….hi do you have a link to this ? TIA

[DLP]

I have a couple of them on a 30 and 60 min tank. I don’t like the screw bleeder. So  I added a quick release lever type ball valve in-line with the hose. Also had problems tightening the stock bleeder screws. So I drilled through them and installed a cold roll pin. Easier to tighten.

[steveoh]

I bought one just like this on eBay and the thread was all wrong. Buyer beware! It should thread on with ease. Mine didn’t.

[kbstingwing]

here's the Walmart link to all their fill stations.
https://www.walmart.com/search/?query=6000%20psi%20pcp%20fill%20station

[kbstingwing]

I also bought an Ebay one, both work just fine, but I guess since Walmart has a good return policy, I will go with them on these, they also had the Hatsan fill probe I needed.....

[Ironwood]

I also bought an Ebay one, both work just fine, but I guess since Walmart has a good return policy, I will go with them on these, they also had the Hatsan fill probe I needed.....

Thinking about getting that Walmart station, what working pressure is listed on the hose?  What was the delivery time, see they are showing over two weeks now.  Thanks,  Scott

[AVS Stephen]

I purchased two of those very similar on AliExpress about 2 years ago and they work great. I paid about $38 for one and $45 for the other. Seems that Walmart is now carrying alot of stuff that was sold by AliExpress. Even the Yong Heng compressor can be purchased on Walmart at same price as AliExpress. I believe Walmart is allowing many of the Asian vendors to offer up on Walmart. Either way that is good for us

[kbstingwing]

I also bought an Ebay one, both work just fine, but I guess since Walmart has a good return policy, I will go with them on these, they also had the Hatsan fill probe I needed.....

Thinking about getting that Walmart station, what working pressure is listed on the hose?  What was the delivery time, see they are showing over two weeks now.  Thanks,  Scott

hose working pressure is 6000 psi, it was delivered in 3 days to me. and it came with extra O-rings....

[triggertreat]

Thanks Kevin!  I just ordered one as a spare from your link. $37.98  $41.49 total.