Author Topic: Tactical much? Post em (Read 1359 times))

Gone Fishing · « **on:** May 15, 2021, 01:23:54 AM »

Post your tactical setups here

bear air · « **Reply #1 on:** May 15, 2021, 08:49:54 AM »

Following

Back_Roads · « **Reply #2 on:** May 15, 2021, 08:58:14 AM »

Too many for a post, skim through this link there should be close to 1/2 the pics are some degree of tactical.
https://www.gatewaytoairguns.org/GTA/index.php?action=media;sa=album;in=318

wimpie swart · « **Reply #3 on:** May 15, 2021, 02:00:52 PM »

My Custom .177 build

dmeguy · « **Reply #4 on:** May 15, 2021, 02:16:34 PM »

Two of mine. .25 Gen1 Marauder in Teryx stock and a custom Airgun Revisions/Cothran .30.

mackeral5 · « **Reply #5 on:** May 17, 2021, 04:44:44 PM »

1720T converted to magazine fed in a Rapid-70 bullpup kit.

PikeP · « **Reply #6 on:** May 18, 2021, 12:06:52 AM »

Love the builds I am seeing. Custom rigs get my juices flowing

Custom 5 lb .25 cal marauder build.

Mods: Regulated, .225"ported, custom valve work / peek poppet, MDS hammer with custom valve lift limiter, custom ssg carrier system, custom ldc, 33cc plenum extension, trigger pull @ 13~ oz. Custom modded gen 1 bolt probe to aid the flow the .225 porting needs. Scratches my itch.

rkr · « **Reply #7 on:** May 18, 2021, 02:34:46 AM »

BSA Ultra bullpup:

DSC00462 by abbababbaccc, on Flickr

With camo:

Viking-1 by abbababbaccc, on Flickr

Mike - · « **Reply #8 on:** May 18, 2021, 03:33:03 AM »

Quote from: rkr on May 18, 2021, 02:34:46 AM

BSA Ultra bullpup:

DSC00462 by abbababbaccc, on Flickr

With camo:

Viking-1 by abbababbaccc, on Flickr

Nice work.

Mike

mackeral5 · « **Reply #9 on:** May 18, 2021, 08:35:44 AM »

That Ultra BP conversion is sweet. How does the cocking mechanism fuction?

ranchibi · « **Reply #10 on:** May 18, 2021, 11:54:49 AM »

RAW HMx LRT .22 Chassis

Hobbyman2007 · « **Reply #11 on:** May 18, 2021, 07:40:47 PM »

This one is a PP750 with a 12” BSA ultra barrel , CARM magazine , AR15 handguard , Atlas clone and the cherry on top a Vortex venom 3moa red dot. Prefers to eat 28grain BBT at 430FPS.

John4861 · « **Reply #12 on:** May 18, 2021, 07:56:28 PM »

Quote from: PikeP on May 18, 2021, 12:06:52 AM

Love the builds I am seeing. Custom rigs get my juices flowing

Custom 5 lb .25 cal marauder build.

Mods: Regulated, .225"ported, custom valve work / peek poppet, MDS hammer with custom valve lift limiter, custom ssg carrier system, custom ldc, 33cc plenum extension, trigger pull @ 13~ oz. Custom modded gen 1 bolt probe to aid the flow the .225 porting needs. Scratches my itch.

Everything on here (so far) is amazing, really. This Marauder speaks to me on another level however, I'm most interested in something like this. Very well played.

ranchibi · « **Reply #13 on:** May 18, 2021, 09:38:07 PM »

Quote from: Hobbyman2007 on May 18, 2021, 07:40:47 PM

This one is a PP750 with a 12” BSA ultra barrel , CARM magazine , AR15 handguard , Atlas clone and the cherry on top a Vortex venom 3moa red dot. Prefers to eat 28grain BBT at 430FPS.

Denis, that is the coolest modded pp750 EVER! They should come like that from the factory LOL...I wish!

Hobbyman2007 · « **Reply #14 on:** May 18, 2021, 10:14:30 PM »

Thanks Randall, it’s not the nicest , but I can almost guarantee it’s the most expensive. I’ve recently added a plenum with gauge from Wes. Single digit ES using the factory regulator. I love this thing.

mackeral5 · « **Reply #15 on:** May 18, 2021, 10:27:34 PM »

Quote from: John4861 on May 18, 2021, 07:56:28 PM

Quote from: PikeP on May 18, 2021, 12:06:52 AM
Love the builds I am seeing. Custom rigs get my juices flowing

Custom 5 lb .25 cal marauder build.

Mods: Regulated, .225"ported, custom valve work / peek poppet, MDS hammer with custom valve lift limiter, custom ssg carrier system, custom ldc, 33cc plenum extension, trigger pull @ 13~ oz. Custom modded gen 1 bolt probe to aid the flow the .225 porting needs. Scratches my itch.

Everything on here (so far) is amazing, really. This Marauder speaks to me on another level however, I'm most interested in something like this. Very well played.

I recall this one from back in the day so to speak. Lots of little details added up to a very nice gun. The folded plenum using a CO2 cartridge is a very unique touch.

Xraycer · « **Reply #16 on:** May 18, 2021, 10:53:24 PM »

Me likes tactical!

KnifeMaker · « **Reply #17 on:** May 18, 2021, 11:42:31 PM »

Raptor Mega Monster.

rkr · « **Reply #18 on:** May 19, 2021, 02:06:03 AM »

Quote from: mackeral5 on May 18, 2021, 08:35:44 AM

That Ultra BP conversion is sweet. How does the cocking mechanism fuction?

The build is based on MMC Ultra so hammer and probe are operated independently. At the rear right side you can see a knob on the side of the hammer tube, that one is directly bolted to hammer. Very good for a hunting gun as you can cock and de-cock the hammer while leaving pellet in the barrel. Huub made a small series of these BSA pups before he went and started the Huma-air.

ranchibi · « **Reply #19 on:** May 19, 2021, 10:03:53 AM »

Quote from: Hobbyman2007 on May 18, 2021, 10:14:30 PM

Thanks Randall, it’s not the nicest , but I can almost guarantee it’s the most expensive. I’ve recently added a plenum with gauge from Wes. Single digit ES using the factory regulator. I love this thing.

You're welcome! Wes carries plenums with gauge for it too!? That is outstanding! I bet the accuracy is special too! Enjoy that lil beast!

Thank you to our advertisers!

Tactical much? Post em

Author Topic: Tactical much? Post em (Read 1359 times))