MRod has new Huma reg - now what?

[Blue]

This is the edge of the rabbit hole, tread carefully.

Now is when you have to start thinking about how one change may effect another.  Generally what you use will depend on your goals.  Think of it in broad terms if you're tuning for maximum shot count the components will be different than if you are tuning for maximum power.  Long shot strings are generally low power and high power tunes are generally low in shot counts.

Some people buy springs from McMaster-Carr but my brain doesn't translate the technical specifications well enough to be able to figure out what I should order.  I have used Hill's hammer springs and I think they offer one or two valve springs.  My instant gratification solution is to sort through the compression spring drawers at a local Ace Hardware looking for something "close".  While this does let me get back to testing quicker, I've probably spent more on springs that seemed close in the store but were just off enough to not work once I got back home than if I had gone with a more expensive spring that was known to be the correct size and waited for it to be delivered.

Blue

[HunterWhite]

Very good questions, that's why the tuners make the big bucks.
Try Hill and Huma.
There are so many variables. Perhaps some one has the same setup.

[GoneShootn]

Very good questions, that's why the tuners make the big bucks.
Try Hill and Huma.
There are so many variables. Perhaps some one has the same setup.

Yeah, that's what I figured, but I don't mind tinkering. I'll look around and see if I can find a starting point as far as the springs go.