10 Shot groups with my Regulated P-Rod

[toku58]

Here's what my shot groups look like at 25 yards 10 shots each.
Using H&N Field & Target 14.66 gr @ 670 fps. gun has a Lane Regulator set at 110 bar. yeilds approximately 48 good shot before it's off the reg.

I'm not sure if I can dial it in better by adjusting the FPS to find the sweet spot of the barrels harmonics?

But I guess it good for a pistol?

LMK what you guys think?

[skorec]

Here's what my shot groups look like at 25 yards 10 shots each.
Using H&N Field & Target 14.66 gr @ 670 fps. gun has a Lane Regulator set at 110 bar. yeilds approximately 48 good shot before it's off the reg.

I'm not sure if I can dial it in better by adjusting the FPS to find the sweet spot of the barrels harmonics?

But I guess it good for a pistol?

LMK what you guys think?

YES For sure.

[Marc In Iowa]

But I guess it good for a pistol?

Those are nice tight groups!

Are you using the carbine stock with a rest?

[Wayne52]

I've been having some fun with my Prod recently, I put an SS valve in it,  I already had the TSS and a couple extra transfer ports to work with.  I ended up drilling another one to .140 so I now have a stock one, .125 and a .140.  I recently blew a TKO off from it a couple days ago in the woods, it couldn't take the energy and cold temps is what I'm thinking caused it but I've got a good one that'll hold up coming from Rocker1.  I was doing a little 50 yard shooting in the woods with it that day and couldn't believe the accuracy from a 12" barrel, it simply amazed me.  These guns are super light to carry, I use one hand most of the time but that day I kinda watched it close while carrying it because the snow was so deep.  I could probably do some amazing things with a Huma regulator in this gun, with TSS hammer and the stock hammer I can choose a very wide range of shooting performance the way it is.

This is pretty much the maximum for the stock hammer and hammer spring in it.



This was running it with the TSS Hammer and stock spring, using this lighter hammer with a regulator would be really nice.

[moorepower]

Here's what my shot groups look like at 25 yards 10 shots each.
Using H&N Field & Target 14.66 gr @ 670 fps. gun has a Lane Regulator set at 110 bar. yeilds approximately 48 good shot before it's off the reg.

I'm not sure if I can dial it in better by adjusting the FPS to find the sweet spot of the barrels harmonics?

But I guess it good for a pistol?

LMK what you guys think?

Thats a bunch of shots! What head size did you end up with?

[Tucobenedicto]

Here's what my shot groups look like at 25 yards 10 shots each.
Using H&N Field & Target 14.66 gr @ 670 fps. gun has a Lane Regulator set at 110 bar. yeilds approximately 48 good shot before it's off the reg.

I'm not sure if I can dial it in better by adjusting the FPS to find the sweet spot of the barrels harmonics?

But I guess it good for a pistol?

LMK what you guys think?

Nice groups,have you tried 14,90 JSB's? My bottled Prod love them,and 18,1grs too,both in 5,53 head size.in the 800fps range they really rocks.

[toku58]

But I guess it good for a pistol?

Those are nice tight groups!

Are you using the carbine stock with a rest?

Yes it's in a carbine configuration.  If I posted some 5 shot groups they were really tight.
With 10 shots every so often I'd get fliers.

This P-Rod doesn't' like PolyMag only the H&N's
My other P-Rod like's PolyMags and doesn't like these H&N's.  I'm thinking it has something to do with the harmonics, or the barrel?
I have them tuned down for effective pest control from 10-25 yards.
My goal is to have them as quiet as possible.
I'm ordering an Impact for the long distance stuff.😁

[FuzzyGrub]

I'm thinking it has something to do with the harmonics, or the barrel?

In my experience, the pellet it likes, follows the barrel. 

[toku58]

I'm thinking it has something to do with the harmonics, or the barrel?

In my experience, the pellet it likes, follows the barrel.

Bummer! I was hoping to tweek the FPS to see if I could get it to like different pellets.

[FuzzyGrub]

Bummer! I was hoping to tweek the FPS to see if I could get it to like different pellets.

That is not to say that you can't do that.  But if it likes X pellet at Y velocity, that will generally follow the barrel. 

[Tonycalves]

Brian thats a great string and good shooting. Now just shoot the *(&^ out of it.

Wayne you could diffenitly benefit from a reg to flatten out all that power

[Tucobenedicto]

Brian thats a great string and good shooting. Now just shoot the *(&^ out of it.

Wayne you could diffenitly benefit from a reg to flatten out all that power

My Prod is regulated at 2000psi and shoot 18,1grs at 794fps,Wayne shoots monsters over 800fps,i think squeeze that speed out with monsters
require to raise regulated pressure over 2000psi,in this case you must accept a low shot count or switch to a bottle or a double tube due to the decreased usable air.