Got me to thinking of a alternate FT competition.
"Field Target" is a game defined by metallic FALLING silhouettes with hit zone holes, through which pellets are fired. The targets are remotely reset to the ready position after being knocked down.The airgun silhouette targets you have are not suitable (and not allowed by rule) in FT, because they are not knock-over types of silhouettes, and not remotely resettable.Suggest you post this in one of the other gates within the "Target shooting" category. I think you will get better answers (and better interest) there.
Quote from: Deckard1973 on December 09, 2017, 01:15:57 PMGot me to thinking of a alternate FT competition.Interesting!If you presented this proposal to a group of existing silhouette shooters, they might really enjoy the novelty of the format ... especially for their off-season or for promotional fun shoots to gather new shooters into the ranks.The simpler you can make the scoring, the better. Good luck,Bob
Next year I will put it into practice.Right now, there is over a foot of snow out there.
Just some constructive criticism ....One shooter and 20 minuets does not sound attractive IMO ... folks come to shoot ! and watching & waiting for others in turn is not shooting.This is one of the merits of actual FT .... everyone is shooting at the same time pretty much.Another being the CLOSED RANGE required while a manual reset of targets happens ... again a time killer for those wanting to shoot. On the cheap is good, but would give more thought in finding a way to get more shooters active between the required resets.JMO,Scott
I am always up for ideas on shooting games and this sounds fun.I also am lucky enough to 100+ yards of flat field with a hill to shoot towards.I down loaded your rules and range attachments.Please keep me posted if you move this to another gate here.That said, here is a thought to reduce the "Down Time"I see these targets are made of mild steel.One could weld, braze, or even bolt a hinge to the base and then mount the other hinge end to a short piece of 2X10.Drill a small hole in the target, thread some kite string, or fish line through the hole, knot it on the back side and run it back to the shooting lane.Maybe even a screw eye in front of the target into the 2X10 and thread the string through that to help the angle of leverage."Presto" re-settable target.