Mutant / Veteran Spare Mag Storage

[d.lead.slinger]

So I am sitting here patiently waiting for the shipping notification of my .25 Veteran when it dawned on me.... Where do you guys keep your spare mags?
I have a Gladius and some Discos so it has never been an issue before.
I did a search and really didn't come up with much and I really don't want to keep it in my pocket.
From the pictures, it looks like I may be able to store them behind the butt pad.  Remove one of the screws, cut out the wood to make a recess for the mag and countersink a magnet to hold the buttpad from swinging open unexpectedly.  This would allow the butt pad to swing open to expose the mag underneath.

What say you?

[Bizill]

I'm not even sure how to remove the buttpad...

[Bizill]

I tried pushing on it left, right, up and down and even straight back but it doesn't budge.  I don't want to knock it loose and screw it up so maybe someone else will chime in...

[Motorhead]

  what i came up with ...
http://www.gatewaytoairguns.org/GTA/index.php?topic=113736.msg1090214#msg1090214

[Rico14]

I use a cell phone case from the Dollar Store. It clips to my belt. It came with a strip of foam inside and I use that to keep the mags from rolling around

[d.lead.slinger]

I'm not even sure how to remove the buttpad...

This is the first picture I have seen of the butt pad, that I can remember.  Guess I just assumed that it had screws holding it on.

[d.lead.slinger]

what i came up with ...
http://www.gatewaytoairguns.org/GTA/index.php?topic=113736.msg1090214#msg1090214

Nice Scott although, my wood working skills might not be up to the task.  I have better luck with larger projects than small.

[d.lead.slinger]

I use a cell phone case from the Dollar Store. It clips to my belt. It came with a strip of foam inside and I use that to keep the mags from rolling around

A clip on cell phone case just might be the ticket.

[cilami]

What about this solution? Check minute 4:00 on ...

[d.lead.slinger]

Made some holders from kydex.  Dont mind the roughness, these were made in a hurry but should work fine.

[Bizill]

Bringing up a necro-post but I was going through my old PM's and forgot all about this old issue that someone messaged me about a few months back...

Problem has now been properly addressed I do believe. 

[d.lead.slinger]

Bringing up a necro-post but I was going through my old PM's and forgot all about this old issue that someone messaged me about a few months back...

Problem has now been properly addressed I do believe. 

Agreed!!!  Mine have been delivered and can't wait to get home and install them!!!
Def look better than the ones I made

[Bizill]

Having a printer helps.  Had I fabbed up anything by hand....well, it wouldn't be too pretty.  Functional, yes,   Pretty, no.  Well, I take that back, I've made my own Kydex holsters and they did come out quite nice.  But the time I had put into them was beyond rediculous.  What the pro's do with Kydex in an hour's time would take me a week or two.