Regulating a PCP

[wolverine]

I would like to install/have installed a regulator in my Brocock Concept standard.

Choices are limited to a Lane or Altaros.

I have a 6 shot string from A.O.A. when they tested the rifle before shipping and it's calculating just over 25fpe. 

Is 6 shots enough to accurately determine the FPE to request how the regulator is set upon ordering it?

[Smoketown]

Robert Lane will give you all kinds of information ...   

http://airgunregulators.com/

Cheers,
Smoketown

[triggertreat]

You really need to know where the psi falls within the plateau of the bell curve.  Having 6 FPE shots won't give you that.  Having the regulator preset around 1700 psi would be a good starting point, but typically you can figure on having to adjust the regulator once or twice to fine tune once you have it installed.

[ackuric]

+1 On Robert Lane...contact him. Regulating isn't just set it and forget it though...you need to do proper modifications which Robert Lane is very descriptive about in his tuning guide. GL