Recommended Marauder Scope Mounts for 50mm Objective

[n2omike]

Looking for something that fits well, isn't any higher than it needs to be, and is good quality.
Going on fully modified guns with a nice scope.
30mm tube

Thanks!

[Tweeter]

I like to use bkl rings.  After using these I don't think I would ever swap back to any other rings.  For dovetail anyways.  They are fairly high so should work with your 50mm scope.  I actually have a set here and can measure them for you if you like.

https://www.pyramydair.com/product/bkl-30mm-rings-3-8-or-11mm-dovetail-matte-black?a=2905

[n2omike]

I like to use bkl rings.  After using these I don't think I would ever swap back to any other rings.  For dovetail anyways.  They are fairly high so should work with your 50mm scope.  I actually have a set here and can measure them for you if you like.

https://www.pyramydair.com/product/bkl-30mm-rings-3-8-or-11mm-dovetail-matte-black?a=2905

I have a set of those on a Marauder with a 56mm scope...  and there's still 1/4" between the scope and barrel, and that's with a thick rubber lens flip cover.  lol  Only see them offered in the one height.  Would kind of like to have something not so high.

Thanks!

[Dairyboy]

I have these with a 42mm objective with a 1/4" room at least.

http://www.bkltech.com/BKL-30mm-6-Long-Dovetail-Rings-p/bkl-304.htm

[Dairyboy]

Gun in the middle

[Tweeter]

PA does offer a lower bkl ring in 30mm but for some reason they only sell singles so you would have to order 2.  Here is how they looked on my S400 with a 42mm scope.

https://www.pyramydair.com/product/bkl-single-30mm-single-strap-ring-3-8-or-11mm-dovetail-60-long-low?a=5705