Ace Precision .35

[tkerrigan]

I got as far as making a tool to unscrew the barrel, then got to wondering if I would shear off a transfer port or something, so I put it back together.  Now that I have seen the Utube's, I will go ahead on the next occasion.  Thanks for putting those up.       Regards, Tom

[Prouzy]

I got as far as making a tool to unscrew the barrel, then got to wondering if I would shear off a transfer port or something, so I put it back together.  Now that I have seen the Utube's, I will go ahead on the next occasion.  Thanks for putting those up.       Regards, Tom

After I saw them it did not look too daunting.

[msurf]

Finally got to shoot mine today....only one shot though!  She barks like my .45 Sam Yang.  Little too loud for the back yard right now.  Cant wait to shoot some more!

[oneshot61]

Never shot mine without the ldc, but I'm sure the neighbors wouldn't like it:)-
Put in a 4.5 mm shim ( a little much should go 3.5 for a flatter string) and shot this string.
110 grain  2750 fill 840,850,860,850,840 832. Odd getting round numbers like that. I tried the sorbothane washers, 2 then 1. Lost 200 fps in 2 and 100 fps in one. So I cut one down to 3/32 and shot this string with 90.4 eppug:
880 890 912 920 899 880 882 err 897 901 865. The spring is great for lighter ammo but fails to open the valve properly above 2750 even with a shim. I'm thinking about adding 5 grams to the hammer. It now weighs 90.7 grams. I did this to my ds and picked up 10 ftlbs, though it is very light , something like 53 grams:0! I have a heavier hammer spring cut to extend just short of the hammer hitting the valve, but have not had time to try it yet. I realize this gun is made for mid range power and shot count, but I'm having fun tuning. And I can always go back to the original setting. The limiting factor for me will be the ports and valve spring. I'm just tuning with hammer spring, weight and ammo . ... Im think I'm an addict;)