GTA
Support Equipment For PCP/HPA/CO2 and springers ,rams => Support Equipment For PCP/HPA/CO2 => Topic started by: Poppacap on November 15, 2015, 02:22:50 AM
-
I'm hoping you guys can help before I pull what little hair I have left out. I have selected a used scba tank that has the standard firemans valve, my local paint ball shop said they will fill it as long as it has a quick connect at the valve that they can hook their compressor to. Can anyone tell me or show me with a pic what the adaptor looks like or is called that would attach to the valve and have a quick connect to be filled at a paint ball shop. I'm ready to order but want to make sure I'm ordering the right equipment. Thanks for any help.
-
You need an SCBA to foster like Jimmy is selling here. This will work to fill your gun. (Mrod right?)
(http://i1122.photobucket.com/albums/l540/kingji01/Air%20Tank%20Set-ups/image_zpsc193fi5o.jpg)
http://www.gatewaytoairguns.org/GTA/index.php?topic=99836.0 (http://www.gatewaytoairguns.org/GTA/index.php?topic=99836.0)
you will then need a male foster to male foster like this
(http://www.airtanksforsale.com/IMG_9112crop_small.jpg)
You leave the fill station on your tank, attach the male foster to foster QC and the paint shop will be able to fill it just like they do a regular Ninja bottle
-
I actually have a hatsan at44. So I Guess with that fitting the shop would be filling through the hose on the tank?
-
I actually have a hatsan at44. So I Guess with that fitting the shop would be filling through the hose on the tank?
I would get the adapter pictured and then put a male foster on the Hatsan fill probe like below.
Then you could fill gun, and then remove the fill adapter, put the double nipple in and get tank filled
(http://i157.photobucket.com/albums/t50/ribbonstone/5mm/73388229-6539-47bd-a8a5-736a7e735441.jpg)
-
Got it, thanks guys, bought the exact set up pictured above today. The cloud is starting to lift! Thanks for the insight.