GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Smitty8141 on October 21, 2015, 12:28:56 AM

Title: Finally getting to shoot the Wolverine long distance
Post by: Smitty8141 on October 21, 2015, 12:28:56 AM

I picked up a Guppy tank and regulator and haven't had time to shoot the Wolverine .303. I had about a half an hour today so I set the regulator at 3300psi and shot at 207 yards. I shoot across a lake at a paint tray. I didn't have enough time to walk around the lake to hang a target. But I shot about 20 shots at the paint tray.

Here is a view through the scope
(http://i980.photobucket.com/albums/ae286/smitty8141/image_zpst3ao8sbn.jpeg)

The wind was about 2-10mph from different directions but the Wolverine does a great job of pushing through. I hit the tray 18 out of 20. The wind, or the shooter, pushed 2 off target.
The amazing part is the pellet is passing through the paint tray and the piece of 1/4" plywood. I can see pieces of wood flying after the shots.

Kevin

Title: Re: Finally getting to shoot the Wolverine long distance
Post by: FredSG on October 22, 2015, 02:48:32 PM

Hi Kevin,

How would the results be had you used the FX Boss on the paint tray and plywood?  Comparison would help me!

Fred