GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: air commando on October 14, 2015, 10:52:03 AM

Title: PROD power increase ...Thanks guys for your suggestions
Post by: air commando on October 14, 2015, 10:52:03 AM

8) 8)[/font

I would like to increase my guns power to about 18ft lbs.

Any suggestions out there ?

Thanks to all who replied , I will  your suggestion a try . ;) ;) ;D

Title: Re: PROD power increase
Post by: wimpanzee on October 14, 2015, 11:14:41 AM

.110 tranfer port and a heavier hammer spring should get you there, for a good 8-10 shots.

Title: Re: PROD power increase
Post by: screwwork on October 17, 2015, 12:49:51 AM

Quote from: wimpanzee on October 14, 2015, 11:14:41 AM

.110 tranfer port and a heavier hammer spring should get you there, for a good 8-10 shots.

What  he said  ;)

Title: Re: PROD power increase
Post by: FuzzyGrub on October 17, 2015, 10:59:44 AM

Add to the above, a BSB o-ring buffer, and should get 14-18 shots.   I got 16 shots at 20 fpe.

Title: Re: PROD power increase
Post by: Whatsquirrel on October 17, 2015, 11:49:56 AM

Mini-rod conversion!!! ;D  21 shots at 38fpe. Or you could do the mods mentioned above.