GTA

All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => Spanish AirGun Gate => Topic started by: waterman on September 29, 2015, 09:43:27 PM

Title: beeman from spain gt650
Post by: waterman on September 29, 2015, 09:43:27 PM

I have it apart but I need advice on getting back together. Looks like you have to compress spring while you install trigger. Not to much to get hold of.    Thanks  waterman

Title: Re: beeman from spain gt650
Post by: OleTomCat on September 30, 2015, 12:10:01 PM

Going to need to build a spring compressor, lots of designs out there, here is mine...

(http://www.gatewaytoairguns.org/GTA/MGalleryItem.php?id=1634)

If that isn't enough to help you build one look in the GTA Library for more details.

Title: Re: beeman from spain gt650
Post by: waterman on October 01, 2015, 11:29:53 PM

I have the spring out. You have to somehow compress the spring while installing the trigger unit.  can't find any imfo on this gun.  thanks

Title: Re: beeman from spain gt650
Post by: Mpac on October 06, 2015, 08:39:49 AM

need something like this to compress your spring to get the trigger back in.

Title: Re: beeman from spain gt650
Post by: waterman on October 06, 2015, 10:48:16 PM

Thanks Dan that looks like the ticket. I came up with something more basic, and a little nerve racking. Smoothed it out a bit but not a great shooter. How does yours shoot.  Thanks wm

Title: Re: beeman from spain gt650
Post by: Mpac on October 07, 2015, 01:15:58 AM

My beeman is one of my first magnum air gun the GS1000 still accurate and hits hard. Be careful when doing your install almost got a gt650 when beeman had there old site up with refurbished guns for sell.

Title: Re: beeman from spain gt650
Post by: waterman on October 09, 2015, 12:04:43 AM

Daniel Your tool would have worked much better. I got it back in but it was a little unnerving .  Thanks again. Ds