GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Big Bore AirGun Gate => Topic started by: rsterne on August 19, 2015, 10:39:25 PM
-
The Group Buy for this pellet mold is now open.... This pellet is designed to fit and function in the .25 cal MRod magazines converted by AirGunLab to .30 cal.... Once Jeremy has received 5 paid orders, he will start work on the new pattern, and absorb the $35 pattern charge.... He has suggested a delivery time of about 10 weeks from that point.... Molds will be $135 for a single cavity, plus $25 extra for each additional base pin to allow a weight change.... Shipping is extra.... There are three suggested weights on the drawing.... All weights are calculated, but should be pretty close.... they may have changed slightly from the discussion thread.... You will need to specify the weight(s) that you want.... Here is the drawing....
(http://i378.photobucket.com/albums/oo221/rsterne/Bullet%20Casting/30%20cal%20Pellet%2054_61%20gr_zpslnsvtqvd.jpg) (http://s378.photobucket.com/user/rsterne/media/Bullet%20Casting/30%20cal%20Pellet%2054_61%20gr_zpslnsvtqvd.jpg.html)
To order, PM jkingsouthafrica to get the details on how to proceed.... If you are participating in more than one Group Buy, talking to him about it may save you some on the shipping.... Note that I am only the designer, I have no affiliation with Jeremy, all arrangements and obligations are between you and him.... Each Group Buy is a stand-alone, and not influenced by the status of the others.... If you decide to participate, please post here so that we know how many are involved in each Group Buy.... The molds fit the inexpensive Lee 6-cavity handles (not supplied)....
Bob
-
Count me in for one w/handles for 30 cal as shown 54 - 58 gr or close. How do I pay for this??and when will we know if enough people go in on it.
Thanks
-
I'm an idiot , just read I need to get my own handles
sorry
-
you can Pay pal to africanairordnance@gmail.com as soon as 5 molds of one type have been paid for we can start making that mold type
-
Double cavity molds will be $195 will come with 2 of same base inserts optional base inserts for different pellet weight will be $25 per insert
-
2 molds have been bought and paid for 3 to go and we can begin production
-
Will that skirt work for the actual .300 TJ's liner?
Rod
-
Absolutely, it is identical to the JSBs, and the .300 TJ's liner won the EBR shooting those....
Bob
-
Glad I accidentally found this post!
I just PM'd jkingsouthafrica for a 2 cavity mold, 61 gr, with handles.
Awesome, Rob
-
Hi guys hope you are all well Ok I've gotten payment for 2 molds a single cavity and 1 double cavity mold in this buy and just invoiced for 3 more double cavity molds as soon as payment is received for the outstanding invoices we can start making the molds.
MOLD HANDELS guys its much cheaper for you guys to buy LEE pro 6 cavity mold handles in USA than for me to ship them from South Africa to you
-
Guys here are photos of the new double cavity JBS 9mm /357 mold just to give you an idea of what the 30 cal double cavity molds will look like once we begin to make them .. this one cast in 82 and 86 grain the photo of the pellets the real JSB is on the left you can see the cast one is almost identical in length to the original
-
bump: update on number of orders?
-
so far just 2 have been ordered a and paid for there were a number of guys who ordered but have not paid yet .
So as to not let the 2 guys who paid down We have started to make there molds as its not fair on them to have to wait such a long time
-
The two mold that were paid for will be ready for shipping on Monday the 19th of October via DHL
-
The first double cavity .30 cal pellet mold going to Robert Chou in CA
-
If photos of shot groups and chrono results produced using this mold should get posted, I would imagine that demand would increase. How much would the cost be to produce 100 of these versus buying JSB's in a similar weight? If they shoot well and cost less, then the mounds should sail of off the shelves, so to speak.
-
Hi the first mold was delivered to the owner last week so still waiting to get his results . the 9mm JSB mold we make has delivered as good of results as the factory original . Using a Recluse 9mm that we had tuned with one of our kits we were getting an average of 975fps and groupings well Ill let the photo speak for its self .. 5 shot group with hand cast 82 grain pellets at 55 yards .
-
That's really awesome.
-
her is the link to a video of me casting 30 cal 61 grain pellets on youtube
https://youtu.be/jctWcbq3gWc
-
Wow, that goes pretty quick once you get in a rhythm.
-
ok lets hear some feed back on these...
-
Yes.....feedback please. i might jus bite the bullet and buy the 61g. Dying to try those in the flex
-
Me three!
-
I wonder how many feet per second you could get one of those 61 grain pellets to fly from the flex?
-
Seriously wanting to participate for a twin cavity, but won't have the funds until "if/when" we find out if our company gives the annual year end bonuses this year... Will know by middle of January. My 2nd issue is determining the weight --
Q: Is it possible to order the "basic" mold whatever that be, then add the needed pin sets to produce 3 different weights? What is the best combination? Already set up to mold handgun bullets, have handles, etc.
I'm jumping the gun (pun intended) since I don't even have a .30 cal yet, but am saving for one. Not even sure what I want to go with yet, although the American Slayer has my keen interest.
-
Seriously wanting to participate for a twin cavity, but won't have the funds until "if/when" we find out if our company gives the annual year end bonuses this year... Will know by middle of January. My 2nd issue is determining the weight --
Q: Is it possible to order the "basic" mold whatever that be, then add the needed pin sets to produce 3 different weights? What is the best combination? Already set up to mold handgun bullets, have handles, etc.
I'm jumping the gun (pun intended) since I don't even have a .30 cal yet, but am saving for one. Not even sure what I want to go with yet, although the American Slayer has my keen interest.
yes it is possible to order the basic mold and have 3 different base inserts to change the weights for each cavity
-
I want to purchase a double cavity mold with inserts for .30 caliber. I sent a PM to ask for more instructions and freight cost etc. Not sure if the group buy deal is still in play?
-
I want to purchase a double cavity mold with inserts for .30 caliber. I sent a PM to ask for more instructions and freight cost etc. Not sure if the group buy deal is still in play?
sent you a pm