GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Dave19113 on July 05, 2015, 06:17:54 PM

Title: Allen Wrench for AT 44 Hammer adjustment...
Post by: Dave19113 on July 05, 2015, 06:17:54 PM
Finally figured out how to adjust the hammer spring on my at44 ( Thanks again BWalton) but my problem now is finding a 5/32 or 4mm allen wrench that is long enough.....

Any ideas? My Low(http://)es and Home Depot dont carry any that are long enough....
Title: Re: Allen Wrench for AT 44 Hammer adjustment...
Post by: blackdiesel on July 05, 2015, 06:22:10 PM
If you take the stock off this will work fine, if you modify the stock to adjust while it's still on you have to take a couple of inches off because it hit the stock while adjusting.

http://www.amazon.com/gp/product/B0006HB20E?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00 (http://www.amazon.com/gp/product/B0006HB20E?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00)

(http://ecx.images-amazon.com/images/I/21-OMsDfzfL.jpg)
Title: Re: Allen Wrench for AT 44 Hammer adjustment...
Post by: Dave19113 on July 05, 2015, 06:39:12 PM
Quote from: blackdiesel on July 05, 2015, 06:22:10 PM
If you take the stock off this will work fine, if you modify the stock to adjust while it's still on you have to take a couple of inches off because it hit the stock while adjusting.

http://www.amazon.com/gp/product/B0006HB20E?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00 (http://www.amazon.com/gp/product/B0006HB20E?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00)

(http://ecx.images-amazon.com/images/I/21-OMsDfzfL.jpg)

Much Thanks blackdiesel....just placed the order.....