GTA
Support Equipment For PCP/HPA/CO2 and springers ,rams => Support Equipment For PCP/HPA/CO2 => Topic started by: mxt on July 03, 2015, 11:18:39 PM
-
Received my Regulator this afternoon from AirSuperiority. Installed it and reset my Hammer spring to full in. I set Regulator At 145. and did some 5 shot strings, from Hammer spring at zero, and 5 shots at 1 full turn counterclockwise. up to 5 turns clockwise on hammer spring. its amazing what 1 turn on a spring does.. was running from 752 - 785 fps... so pulled Regulator out. and turned it up to 151 setting on regulator. it boosted my fps to 799 805 fps range. but wow it became an airhog. so gonna pull it tomorrow and try a lower setting around 137-140 and attempt to get somewhere in the ballpark of 40-45 fpe. before regulator i was getting 50 fpe but the trade off is accuracy. it takes me awhile cause i don't have the privilage of a place to get tanks filled so all is being done with a hand pump. a little over 300 strokes from zero to 200 bar. but so far I'm liking what I'm seeing. and also noticed my gun was quieter with hammer spring full in and at one turn out. it started sounding louder at 2 turns out......interesting..... to be continued
HAPPY 4TH EVERYONE!!!!!