GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Dave19113 on June 16, 2015, 06:34:04 PM

Title: Regulator for Hatsan AT44 10 Tactical
Post by: Dave19113 on June 16, 2015, 06:34:04 PM
Hi all,

Recently made the switch to a pcp in the form of a Hatsan AT44 10 Tactical. Was doing alot of research before hand and stumbled upon threads on regulators.

I am not looking for max velocities but a consistent and extended shot string so it seems a regulator is the way to go.

My question goes to how do I obtain one? All the areas seem to be in other countries.

Is everyone just ordering international or is there a local importer or producer for the Hatsan AT44 10 Tactical?

Also, which one is the best to go with? Id want one I can just screw in without alteration?

Thanks in advance for all the help

Dave
Title: Re: Regulator for Hatsan AT44 10 Tactical
Post by: Bwalton on June 16, 2015, 06:44:10 PM
Quote from: dave19113 on June 16, 2015, 06:34:04 PM
Hi all,

Recently made the switch to a pcp in the form of a Hatsan AT44 10 Tactical. Was doing alot of research before hand and stumbled upon threads on regulators.

I am not looking for max velocities but a consistent and extended shot string so it seems a regulator is the way to go.

My question goes to how do I obtain one? All the areas seem to be in other countries.

Is everyone just ordering international or is there a local importer or producer for the Hatsan AT44 10 Tactical?

Also, which one is the best to go with? Id want one I can just screw in without alteration?

Thanks in advance for all the help

Dave

Here you go
http://www.air-superiorityproducts.com/ (http://www.air-superiorityproducts.com/)
Title: Re: Regulator for Hatsan AT44 10 Tactical
Post by: Dave19113 on June 16, 2015, 07:01:06 PM
Wow... that was easy..... I was looking for a few hours and nada.... Much thanks..

I was just on the site and was reading up on it... My other question is how do you set it to a set pressure? It says they all come set to "Standard pressure" what is that exactly?
Title: Re: Regulator for Hatsan AT44 10 Tactical
Post by: Bwalton on June 16, 2015, 07:02:47 PM
Just give Nick a call and he can walk you thru it all, There is a dial on top in which to adjust the reg.
Title: Re: Regulator for Hatsan AT44 10 Tactical
Post by: Dave19113 on June 16, 2015, 08:33:01 PM
Much thanks again.... sorry for all the rookie questions... but Id rather ask then end up making a big mistake....
Title: Re: Regulator for Hatsan AT44 10 Tactical
Post by: huggybear on June 17, 2015, 12:55:38 AM
If the power mod has been done does the regulator do any good?
Title: Re: Regulator for Hatsan AT44 10 Tactical
Post by: Bwalton on June 17, 2015, 01:04:30 AM
Quote from: huggybear on June 17, 2015, 12:55:38 AM
If the power mod has been done does the regulator do any good?
Mine has way more mods then the basic and the regulator just makes it that much better.
Title: Re: Regulator for Hatsan AT44 10 Tactical
Post by: huggybear on June 17, 2015, 01:34:27 AM
Very interesting. I did the valve mod so my ports are aligned and enlarged. I am spitting 21 grain kodiaks out at 950fps but I wouldnt mind a little more shot count and consistency.
Title: Re: Regulator for Hatsan AT44 10 Tactical
Post by: huggybear on June 19, 2015, 01:54:36 AM
Well holy &^^&! I just noticed that those regulators are made about 45 minutes from me. ROAD TRIP!
Title: Re: Regulator for Hatsan AT44 10 Tactical
Post by: Dave19113 on June 19, 2015, 09:37:32 AM
Spoke with Tim at length yesterday.... really good guy and was patient with me in my inexperience..... Im def going the regulator route.... just gotta wait for the 22 cals to come back in......
Title: Re: Regulator for Hatsan AT44 10 Tactical
Post by: Rocko on June 20, 2015, 12:39:33 AM
Milo74 right here on the forum makes a very nice reg.  He made one for my new Krosa .22 & it fit & functions perfect !  And only $82.00 shipped.  PM him here on the forum for more info.