GTA

Airguns by Make and Model => Benjamin Airguns => Topic started by: Steeb86 on June 11, 2015, 09:51:13 PM

Title: NP2 trigger spring
Post by: Steeb86 on June 11, 2015, 09:51:13 PM

I was cleaning my NP2 today and when I went to reinstall my trigger group I didn't notice the spring had fallen out.  Now, I can't seem to get it to stay inside the trigger group to reassemble.  Can anyone help show me how to make the spring stay in??  This was my first teardown of the np2 so I wasn't quite ready for that to happen.

Title: Re: NP2 trigger spring
Post by: OldFlyRod on June 11, 2015, 10:24:52 PM

I know there must be a better way, but i've done it this way.

1. You can pull the trigger turn  the assembly over.

2. Set the spring in place on the primary sear.

3.Close the secondary sear and keep presure on it while you replace the trigger pin.

If I missed something, someone please chime in.

Title: Re: NP2 trigger spring
Post by: Bentong on June 11, 2015, 11:25:21 PM

Have you tried this > http://www.gatewaytoairguns.org/GTA/Parts_Schematics/CROSMAN,_GAMO,CHINESE_TRIGGER.pdf (http://www.gatewaytoairguns.org/GTA/Parts_Schematics/CROSMAN,_GAMO,CHINESE_TRIGGER.pdf)

Title: Re: NP2 trigger spring
Post by: Steeb86 on June 12, 2015, 11:05:15 AM

I got it, I was able to keep pressure on it and reinstall.  All is well :). Thanks guys!