GTA

All Springer/NP/PCP Air Gun Discussion General => Machine Shop Talk & AG Parts Machining => Show us your Custom Airgun Parts (TRICKS-N-TIPS) => Topic started by: Bwalton on May 03, 2015, 12:07:37 PM

Title: Hatsan QE Shroud
Post by: Bwalton on May 03, 2015, 12:07:37 PM

I like the idea and it works, and great for those who do not tinker....that counts me out ;D I got one and took the tube measurements and made a 2 piece shroud. I can still take my barrel out with the two set screws that hold the barrel in. I can still use my LDC which is a tad quieter then the QE shroud. And looks great I think? ;D

Title: Re: Hatsan QE Shroud
Post by: Yarp on May 03, 2015, 12:12:21 PM

Looks good.
Is that your .25?

Title: Re: Hatsan QE Shroud
Post by: Bwalton on May 03, 2015, 12:41:13 PM

Yes Dave thats the Hammer ;D

Title: Re: Hatsan QE Shroud
Post by: dcorvino on May 03, 2015, 01:08:30 PM

Nice work Baxter.
That's a great looking rifle.

Dave

Title: Re: Hatsan QE Shroud
Post by: Gertrude on May 03, 2015, 01:37:27 PM

looks great Baxter.  ;D

Title: Re: Hatsan QE Shroud
Post by: Bwalton on May 04, 2015, 12:51:16 PM

Thanks Ron, I think that its more the look as the LDC does all the work... And this design makes it easy to take the barrel off for cleaning without having to use special tools to do so.

Title: Re: Hatsan QE Shroud
Post by: Bwalton on May 05, 2015, 06:54:03 PM

Well I have decide on what to do with the rest of the shroud that I cut up, going to make a screw on LDC out of it, The top screws off and the bottom will come off with set screws. I will not use the baffles that it came with, I think that my design is a tad bit more quite. Will be on the market when done ;D