GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: RFC on March 23, 2015, 09:01:46 PM

Title: Seeking guidance re installing a regulator in an Air Arms MPR (not FT)
Post by: RFC on March 23, 2015, 09:01:46 PM

Hi All,

I  have an Air Arms MPR.  This is NOT the FT model, so the air tube unscrews for filling like a 10m rifle.  I have done a good deal of work on ARs, both springer and PCP.  However, I have never installed a regulator.  So, with your indulgence, I have a few basic questions.

1) With this type of AR, is the regulator installed in the removable air reservoir ahead of the valve?

2) Will the gain in efficiency make up for the loss of volume?

3) What regulator do you recommend?

Thanks all!

Title: Re: Seeking guidance re installing a regulator in an Air Arms MPR (not FT)
Post by: Rdsail on March 24, 2015, 08:05:05 AM

RFT. I recommend Robert Lanes regulator highly. Contact him. He can help you out. You just need to let him know what power level you want on your gun.

I have one on my MPR FT and love it. I get just over 100 shots at 12fpe.