GTA
All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => China/Asian AirGun Gate => Topic started by: 1216bandit on March 11, 2015, 09:03:22 PM
-
I picked up a couple of Remingtons for myself and a buddy and had them sent to Josh for a bit of a go over. Josh worked on the triggers, polished the internals, custom made spring guide and tophat, and added a new seal. The triggers are set light and REALLY very nice...short first stage then just a slight increase in pressure for a crisp second stage. The shot cycle is docile and tame they both launch rws superdomes at a little over 880 fps. with a very narrow E.S. We are both very pleased with the work Josh did...Thanx Josh!
I have been so darn busy with work that I really have not had much of a chance to determine which pellets work best. I hope to get a bit more trigger time this weekend!
-
Looking forward to a range report Dan.
Scotty
-
Ive had good results with just the crosman premiers out of all the remingtons ive worked on. Glad you like them.
-
Ive had good results with just the crosman premiers out of all the remingtons ive worked on. Glad you like them.
Mine did terrible with the Crosman pellets (and Benji). But the 8.44 JSB's at 910fps or the 7.33's at 975 are all one hole at 10M