GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: Bwalton on March 08, 2015, 09:54:03 PM
-
Took the BT65 out and it was not acting right at all, Did manage to add some GS to the KIA list. The next day I took it to the range here at home, they were having the club shoot. Mike from Co. was there real nice guy.. Did plan on doing the 5 shot groups @ 50 yards but the BT was ill. Took it home and took it apart and this is what I found Picture below...Has anyone else had this problem?
-
Is that bolt broke? When I owned a BT65 nothing serious ever happened, the worst thing I had go wrong was the breach o-ring being blown out. Sorry to see it's sick.
-
Haven't seen that one, did it just work it's way out?
-
No it broke off I have no clue as of how. the rest of the bolt is still inside. emailed Hatsan may have to send it in....
-
That's a bummer having to send it in for repair. Maybe they will swap it out for the BT65 Elite in .30 cal... ;)
-
That's a bummer having to send it in for repair. Maybe they will swap it out for the BT65 Elite in .30 cal... ;)
Im just going to send the action the rest is done grade A by me, re crown, Valve, and some other stuff
-
Yep had it break on me about a year ago. I used an easy out screw extractor and had Hatsan send me another.
-
Yep had it break on me about a year ago. I used an easy out screw extractor and had Hatsan send me another.
any idea what caused it? I could machine a stronger one, did you loose accuracy when it broke?
-
In my at44 long qe, that was broken out of the box. When I contacted hatsan they wanted me to send the whole gun back, I just made another & left it alone.
-
When I looked at that part it seems weak....that holds the brass part for the air tube and the stock mounts to it also.
-
I just thought about something I have an extra parts gun, going to dill it out and use the part from the other gun ;D I am also going to machine one out at work which will be a whole lot better.
-
Took the BT65 out and it was not acting right at all, Did manage to add some GS to the KIA list. The next day I took it to the range here at home, they were having the club shoot. Mike from Co. was there real nice guy.. Did plan on doing the 5 shot groups @ 50 yards but the BT was ill. Took it home and took it apart and this is what I found Picture below...Has anyone else had this problem?
that is all the GS's you shot speaking from the grave getting back at you lol
-
Lol in that case I'm going to dig them up and shoot them again lol
-
Yeah before I figured it out my groups went to *(&^. Not sure if it was overtightened or if I had bumped the stock too hard or what.
-
Happened to my on my AT44 however it was my fault, I tried to tighten the screw and accidentally broke the head, I removed the screw from the gun and ordered another one, however I kept shooting without the screw when I was waiting for it and accuracy was the same, I even made my best group at .03" CTC at 25 yards.
Haven't had any problem with the new screw since then.
-
Interested to see how this works out Baxter.
-
Happened to my on my AT44 however it was my fault, I tried to tighten the screw and accidentally broke the head, I removed the screw from the gun and ordered another one, however I kept shooting without the screw when I was waiting for it and accuracy was the same, I even made my best group at .03" CTC at 25 yards.
Haven't had any problem with the new screw since then.
My accuracy was horrible when it broke, I do not know when it broke. But I did know that my accuracy was not right, I thought that it was the scope then the LDC, then checked the shot string. After all that then took it apart. I have another part here so im taking it to work tomorrow and drilling it out and putting the new one in.
-
Don't mean to hijack this thread but thought some might be interested that B.B. is doing a review of the BT65 QE .25 cal on the Pyramidair blog.
-
Don't mean to hijack this thread but thought some might be interested that B.B. is doing a review of the BT65 QE .25 cal on the Pyramidair blog.
You got the link
-
Lol in that case I'm going to dig them up and shoot them again lol
haha, if THATS the case,.. I better go check ALL the screws and bolts on my guns !
We've got to take down MORE this season than we did last season...
...and if I remember correctly, we took about 350 off the one goat farm alone !
I think i'm going to need more pellets... and I think I'm going to need a big bore soon ;D ;D ;D
-
And I'm thinking what your thinking....Get a lot of pellets, when the Alfa farm opens up it will be total chaos
-
Baxter, this is the link: https://www.pyramydair.com/blog/2015/03/hatsan-bt65-qe-part-1/ (https://www.pyramydair.com/blog/2015/03/hatsan-bt65-qe-part-1/)
-
I took her to work got the broke part out , put the new part in and she is back!
-
Nice, everything back to normal then?
-
Nice, everything back to normal then?
oh yeah I just got in from zeroing the rifle, and creating a new range card. did groups from 100yards down to 30yards in increments of 10. Im a happy camper.