GTA

All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: timinater64 on March 07, 2015, 09:31:04 AM

Title: LDC for the xs60c pcp
Post by: timinater64 on March 07, 2015, 09:31:04 AM
Has anyone came up with a idea on how to lower the shot noise on the FD pcp?
Title: Re: LDC for the xs60c pcp
Post by: smythsg on March 07, 2015, 11:40:31 PM
I had a TKO on mine, worked great
Title: Re: LDC for the xs60c pcp
Post by: ScarletFire186304 on March 08, 2015, 12:52:31 PM
there was this thread where someone talked about a LDC for them .
check reply #8   

http://www.gatewaytoairguns.org/GTA/index.php?topic=84717.0 (http://www.gatewaytoairguns.org/GTA/index.php?topic=84717.0)

BTW, i have TKO's also . they do work great (they are not cheap. you get what you pay for, though)  8)

bob
Title: Re: LDC for the xs60c pcp
Post by: timinater64 on March 08, 2015, 02:14:32 PM
Im sorry but what is a ldc?
Title: Re: LDC for the xs60c pcp
Post by: ScarletFire186304 on March 08, 2015, 03:07:57 PM
ahh, i remember when i asked that very same question about a year ago!!  8)

i PM'd you.

bob
Title: Re: LDC for the xs60c pcp
Post by: Busta Cap on March 08, 2015, 08:19:56 PM
Quote from: smythsg on March 07, 2015, 11:40:31 PM
I had a TKO on mine, worked great

Same here and made it super quiet!!  Lots of experience here with folks making their own barrel length tubes instead of pickles though
Title: Re: LDC for the xs60c pcp
Post by: StevenG on March 08, 2015, 08:22:30 PM
Same here, TKO works great. Almost Hollywood.
Title: Re: LDC for the xs60c pcp
Post by: timinater64 on March 08, 2015, 09:56:21 PM
Ok thanks all next question how do you get the front sight off ? Man that thing is on there. Oh by the way got my new scope from on from Amazon its a 3-9 by 56 id love to send pics from my samson but forgot how to do it.
Title: Re: LDC for the xs60c pcp
Post by: tuanhatsan125 on March 08, 2015, 10:26:03 PM
remove the front sight simlpy unscrew the set screw give it a light tap and voila ! so easy.
Title: Re: LDC for the xs60c pcp
Post by: Busta Cap on March 08, 2015, 10:56:21 PM
If you have any questions don't hesitate to call MM.  He almost always answers the phone and is always willing to answer your questions.
Title: Re: LDC for the xs60c pcp
Post by: Ribbonstone on March 08, 2015, 11:01:10 PM
Think it's the same diameter barrel as the QB78D/QB79, at least on mine (1st generation) the LDC for one fits on the other.
Title: Re: LDC for the xs60c pcp
Post by: timinater64 on March 09, 2015, 12:55:29 AM
I took set screw out i put it in a vise i pulled on it with a channel locks i cant get it to budge.
Title: Re: LDC for the xs60c pcp
Post by: Sfttailrdr46 on March 09, 2015, 12:58:39 AM
 ;D Try using a wooden block and Light hammer place wood against front sight and give wooden block a sharp tap with hammer it should pop right off
Title: Re: LDC for the xs60c pcp
Post by: Kailua on March 09, 2015, 01:11:18 AM
I used a heat gun to remove my muzzle break.
Title: Re: LDC for the xs60c pcp
Post by: PBguns on March 24, 2015, 06:48:28 AM
I have a Umarex Fusion (very close). I cut the LDC that came with it off & made a new one. Its quiet now. Just got done with the bulk mods last month. You will be happy when you quiet it down. 

(http://i1172.photobucket.com/albums/r563/mkdive/Airguns/E8F0D541-052B-490E-91C4-7DBDD3334C48_zpsyp23moxz.jpg) (http://s1172.photobucket.com/user/mkdive/media/Airguns/E8F0D541-052B-490E-91C4-7DBDD3334C48_zpsyp23moxz.jpg.html)
Title: Re: LDC for the xs60c pcp
Post by: timinater64 on March 24, 2015, 04:55:06 PM
Nice pic, I ended up taking my front sight off and sawed of the fiber optic and put a piece of plastic hose into the sight hole just enough for me to get it back on, i made it snug with a wrap of duct tape. It took away the load crack, so better than it was. So far this is my most favorite gun ever.