GTA
All Springer/NP/PCP Air Gun Discussion General => PCP/CO2/HPA Air Gun Gates "The Darkside" => Topic started by: HillGSA on March 06, 2015, 02:10:06 PM
-
I tuned one of my .25 cal. Marauder rifles today for more shots per fill ( see pic/chart ). Starting with a 3000 psi fill pressure, I stopped at 36 shots, for a 3% es, with an average of 35 fpe, using 25.39 grain JSB pellets. With some more tweaking of the fill pressure and/or maybe the hammer spring adjustment, I should be able to get 40- good/accurate shots ( 5- full magazines ).
I wanted to test for accuracy out to 48 yards ( see pic ), but the wind was blowing so much, I just shot a 3- shot group. I can test for accuracy on another day, when the wind is not blowing around so much.
I just received a new scope in and mounted it onto the rifle ( see pic ) http://www.weaveroptics.com/optics/riflescopes/tseries/ (http://www.weaveroptics.com/optics/riflescopes/tseries/). I have the one with the fine crosshair 1/8 MOA dot reticle. I got it mainly for testing pellet accuracy. I did quite a bit of research and found where a lot of the competitors with .22 cal. rifles like it, so I though I would give it a try. I’m looking forward to testing it out. The scope comes with traditional eyepiece focus, a sunshade, screw-in aluminum lens caps and an extra pair of oversized benchrest adjustment knobs. The rifle with the scope mounted weights just under 9 lbs..
(http://i1365.photobucket.com/albums/r750/marauderrifle/IMG_3065_zpsnd4fftah.jpg) (http://s1365.photobucket.com/user/marauderrifle/media/IMG_3065_zpsnd4fftah.jpg.html)
(http://i1365.photobucket.com/albums/r750/marauderrifle/IMG_3066_zps5gtp3eud.jpg) (http://[url=http://s1365.photobucket.com/user/marauderrifle/media/IMG_3066_zps5gtp3eud.jpg.html%5D%5BIMG%5Dhttp://i1365.photobucket.com/albums/r750/marauderrifle/IMG_3066_zps5gtp3eud.jpg%5B/IMG%5D%5B/URL%5D)
(http://i1365.photobucket.com/albums/r750/marauderrifle/IMG_3061_zpss9ze4tex.jpg) (http://[url=http://s1365.photobucket.com/user/marauderrifle/media/IMG_3061_zpss9ze4tex.jpg.html%5D%5BIMG%5Dhttp://i1365.photobucket.com/albums/r750/marauderrifle/IMG_3061_zpss9ze4tex.jpg%5B/IMG%5D%5B/URL%5D)
(http://i1365.photobucket.com/albums/r750/marauderrifle/IMG_3063_zpseypydxta.jpg) (http://[url=http://s1365.photobucket.com/user/marauderrifle/media/IMG_3063_zpseypydxta.jpg.html%5D%5BIMG%5Dhttp://i1365.photobucket.com/albums/r750/marauderrifle/IMG_3063_zpseypydxta.jpg%5B/IMG%5D%5B/URL%5D)
(http://i1365.photobucket.com/albums/r750/marauderrifle/IMG_3057_zpsrx5ss50o.jpg) (http://[url=http://s1365.photobucket.com/user/marauderrifle/media/IMG_3057_zpsrx5ss50o.jpg.html%5D%5BIMG%5Dhttp://i1365.photobucket.com/albums/r750/marauderrifle/IMG_3057_zpsrx5ss50o.jpg%5B/IMG%5D%5B/URL%5D)
-
What custom parts did you install?
I have a friend locally that just ordered a .25 mrod, and is looking to do some "adjusting"
Do you have the link to some of your tunes for a stock .25 mrod?
Thanks.
-
What custom parts did you install?
I have a friend locally that just ordered a .25 mrod, and is looking to do some "adjusting"
Do you have the link to some of your tunes for a stock .25 mrod?
Thanks.
Longer shroud, upgrade kit, barrel band. I also adjusted the trigger.
Here is a link for a stock rifle tune:
http://www.gatewaytoairguns.org/GTA/index.php?topic=76933.msg732341#msg732341 (http://www.gatewaytoairguns.org/GTA/index.php?topic=76933.msg732341#msg732341)