GTA

All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => Turkish AirGun Gate => Topic started by: thetroutwhisperer on March 03, 2015, 08:41:31 PM

Title: what can be done?
Post by: thetroutwhisperer on March 03, 2015, 08:41:31 PM
Hey guys. I was just wondering what I could do to improve my Hatsan 95 right out of the box. I just got it and would like to make some improvements that I might not be aware of. So far all I've done is clean the barrel and take off the scope it came with.
Title: Re: what can be done?
Post by: joek on March 04, 2015, 01:35:26 AM
Put at least a tin of pellets through it. The most info I have found on the 95 is on this polish forum.
http://www.e-tawerna.pl/ (http://www.e-tawerna.pl/)
Title: Re: what can be done?
Post by: SpiralGroove on March 04, 2015, 11:43:22 AM
Hey thetroutwhisperer,
How much work are you able to do?  Do you have a lathe/many hand tools?

Things I would recommend:
1) Get a Hawke or Leaper's 3x9x40 scope at a minimum.
2) Scour your bore well.
3) Replace the trigger adj. screw closest to the muzzle (Home Depot - $1.00)  Get one size longer (round/polish end).
4) Shoot the gun for awhile.
5) Do a search on tuning the Hatsan 95 - there are many posts from 2012/2014.
6) Do a tune if you have the desire, tools and skills.
Title: Re: what can be done?
Post by: D14Jeff on March 04, 2015, 12:43:14 PM
https://www.youtube.com/user/MsSteppingstone/feed?activity_view=3 (https://www.youtube.com/user/MsSteppingstone/feed?activity_view=3)
Title: Re: what can be done?
Post by: 62hotrod on March 04, 2015, 01:03:54 PM
Clean the barrel REALLY GOOD and do only the trigger mod until warranty runs out, shoot all you can until then. Be sure to keep the factory screw in a safe place incase she needs to go back for warranty repairs, that way you can put it back in.
Title: Re: what can be done?
Post by: thetroutwhisperer on March 05, 2015, 08:27:27 PM
Hey guys thanks for the responses. I'm going to try and do as much as possible. So far I have cleaned the barrel, taken about 100 shots with it, got the iron sights dialed in, got a 3x9x40 scope by Hammers. Would have went with other suggestions but it was too late. My next plan is to replace the trigger screw as mentioned, get the scope right, keep shooting and cleaning, looking for other improvements to make. Have to work sometime though and it's quite snowy still up here!
I'm pretty mechanically inclined, even for an accountant, have a decent amount of tools, no lathe however.
Title: Re: what can be done?
Post by: SpiralGroove on March 05, 2015, 08:43:18 PM
Hey TTW,
We can talk more about future modifications after you get your current tweaks worked out.
By the way, what is the compensation, phase out range for a Roth IRA's in 2015?

Kirk
Title: Re: what can be done?
Post by: thetroutwhisperer on March 05, 2015, 09:34:18 PM
I'll be working, and keeping you all posted. Might run down to the depot tonight and look for the adjustment screw. Appreciate the pointers.
How does a Say on Pay deal sound?
Title: Re: what can be done?
Post by: SpiralGroove on March 06, 2015, 01:01:45 AM
How does a Say on Pay deal sound?  ???
What?
Title: Re: what can be done?
Post by: thetroutwhisperer on March 10, 2015, 11:35:44 AM
Haha just an attempt at a bad joke.