GTA
All Springer/NP/PCP Air Gun Discussion General => European/Asian Air Gun Gates => China/Asian AirGun Gate => Topic started by: BigTinBoat on February 27, 2015, 09:39:10 PM
-
I got my B26 trigger from Mike and installed. Trigger is great now.
I'm not much on shooting a springer, yet, but I think this shows the guns potential. It's had about 700 shots down the pipe and is throwing the JSB's right around 900FPS. I have shot any high $$ springer but this one has no buzz or twang just a solid thunk when it fires.
Got home from work and shot the below target. Warm-ups with Gamo and Benji HP pellets then I broke out the JSB's
I know it's only 10m but that's what I have to work with for right now.
I think it can be a shooter. The bullseye dots are 1/4" btw.
(http://www.gatewaytoairguns.org/GTA/index.php?action=dlattach;topic=84301.0;attach=100579;image)
-
I'm really starting to get into shooting a springer. I mean I love how accurate my Disco, Hammerli 850 and 1720T are, but I'm starting to get that feeling that comes over you when you feel like you are "controlling" a springer. Starting to hit where you think it is going to hit when you pull the trigger. Especially since this is an $89 gun. I even went and sealed the deal on a 20 year old Beeman R7
Anyway here is the Remmy shooting off my hand (and resting on sand bag)at 10M
(http://www.gatewaytoairguns.org/GTA/index.php?action=dlattach;topic=84301.0;attach=100894;image)
Here it is with the gun resting on the sand bag about 1.5" in front of the trigger guard.
(http://www.gatewaytoairguns.org/GTA/index.php?action=dlattach;topic=84301.0;attach=100896;image)
Can't wait till this snow and ice melts and I can try to extend the distance out.
I can't wait to see what the R7 will do.....
-
Buddy I don't know what to tell ya besides good shooting and that I love mine as well. I'm waiting for Remington to come out with the smaller version.
-
Buddy I don't know what to tell ya besides good shooting and that I love mine as well. I'm waiting for Remington to come out with the smaller version.
Thanks - I won't need the smaller version though as I got lucky and just picked up a 1993/94 Beeman R7. That will be my "plinker". This will be a longer range plinker/hunter
-
What did you have to do to get the new trigger to fit and work ?
-
What did you have to do to get the new trigger installed and working correctly ?
-
What did you have to do to get the new trigger installed and working correctly ?
Remove the action from the stock. Pull out the pin that holds the trigger. Remove old trigger. Insert B26 trigger. Reinsert trigger pin.
Reinstall action in stock. That's it. Only tool needed is Phillips screw driver to remove/reinstall the stock.