GTA
Airguns by Make and Model => Daisy Airguns => Topic started by: stonykill on January 22, 2015, 10:43:12 PM
-
I just got done filling a piston and putting modded a hammer in a new valve body/barrel assembly for Ole Faithful. My 2013 880. The one that got me hooked on Daisy's.
Ole Faithful stays a .177.
(http://i169.photobucket.com/albums/u215/stonykill/DSCF3260-001_zps201b146b.jpg)
Some time over the next few day's I'll swap the parts out. Then resight her in.
-
I just got done filling a piston and putting modded a hammer in a new valve body/barrel assembly for Ole Faithful. My 2013 880. The one that got me hooked on Daisy's.
Ole Faithful stays a .177.
(http://i169.photobucket.com/albums/u215/stonykill/DSCF3260-001_zps201b146b.jpg)
Some time over the next few day's I'll swap the parts out. Then resight her in.
Like with me. I will always keep my first 880 as a .177, and maintain the mods that I have done as well as maintain the rifle overall. the one that got me hooked on Daisy's.
Have fun.
-
Well I put worked on Ole Faithful tonight. I decided to not swap out valve body/barrels. Then it wouldn't be Ole Faithful, but a different 880 in Ole's clothing ;) . So I took Ole apart and swapped out some parts. Pictured are the modded hammer, an older trigger ( the casting on the older triggers just looks nicer) and an old flat top 880 piston with new oring and wiper.
(http://i169.photobucket.com/albums/u215/stonykill/DSCF3759-001_zps2mr595vy.jpg)
All back together and the hammer and piston I removed currently have JB weld drying on them :D . For the next build.
I'll re sight her in in the am and see what I think.