GTA

All Springer/NP/PCP Air Gun Discussion General => Air Gun Gate => Topic started by: alexterminateur on January 20, 2015, 09:38:32 PM

Title: bnm shroud little problem
Post by: alexterminateur on January 20, 2015, 09:38:32 PM

Anybody ever had that problem
I was to install a bnm shroud on My disco and when installing and adjusting the centering ring and My centering ring got stock at thé end inside the shroud. How to take it out.. Its completely stock inside 20 some inches.

Maybe somebody has a trick for that.

Title: Re: bnm shroud little problem
Post by: YEMX on January 20, 2015, 10:19:39 PM

you mean the drilled bushing that goes at the muzzle end of the barrel is stuck?  Have you tried something like a coat hanger, or a wooden dowel w/a coat hanger at the end of it?